I have just installed the 4.0-beta snapshot & noticed a error message
when booting GENERIC.MP
cpu1: unknown i686 model 1, can't get bus clock
the machine is a old IBM PC 365, dual p-pro. the machine was previously
running 3.9-STABLE without any such errors.
Regards
Sevan / Venture37
OpenBSD 4.0-beta (GENERIC.MP) #870: Thu Aug 3 11:50:54 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 200 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
real mem = 133787648 (130652K)
avail mem = 114774016 (112084K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/12/00, BIOS32 rev. 0 @ 0xfd891
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 5 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
mainbus0: Intel MP Specification (Version 1.1) (IBM-PCCO CrossFire MP)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: unknown i686 model 1, can't get bus clock
cpu0: apic clock running at 66 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 200 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x01
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPA3035ATU>
wd0: 16-sector PIO, LBA, 3337MB, 6835952 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 32X/AKU, U10I> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 2 int
19 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vga1 at pci0 dev 6 function 0 "Matrox MGA Millenium 2064W (Storm)" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ral0 at pci0 dev 7 function 0 "Ralink RT2560" rev 0x01: apic 2 int 17
(irq 9), address 00:11:09:2a:59:f7
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
sis0 at pci0 dev 11 function 0 "NS DP83815 10/100" rev 0x00, DP83815D:
apic 2 int 16 (irq 5), address 00:40:f4:3b:c7:0f
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cpu1: unknown i686 model 1, can't get bus clock
--
"The truth, the half-truth, and nothing like the truth." - Mark Brandon Read
