your dmesg shows that pciide doesn't attach to your SATA controller and
wd0 is attaching to an isa device. try a current snapshot
Alan Pearson [EMAIL PROTECTED] wrote:
> Hi all
>
> I'm running OpenBSD 3.9 X86 on an HP Proliant DL140 G2.
>
> The first problem I had was at install time, it would hang and PCIIDE
> would complain of timeouts accessing wd0.
>
> I got through the install by disabling PCIIDE at kernel boot time.
>
> After the install, I (obviously) got the same problem and ended up
> changing the UDMA flags on pciide to 0xCAC (ie. UDMA4, DMA2 & PIO4).
>
> However the disk access is sloooooow as can be (talking 2MB/sec reads,
> 1MB/Sec writes).
>
> My dmesg doesn't mention PCIIDE or DMA at all.
> Can anyone at all help me here ? I'm reasonably new to OpenBSD and feel a
> bit like a fish with no fins.....
>
> Dmesg :
> $ dmesg
> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
> cpu0: Enhanced SpeedStep disabled by BIOS
> real mem = 1072717824 (1047576K)
> avail mem = 972107776 (949324K)
> using 4278 buffers containing 53739520 bytes (52480K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(24) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd410
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd410/0xbf0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde30/432 (25 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #7 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1600 0xc9800/0x1600 0xdc000/0x4000!
> ipmi: bus_space_map(1 ca0 2 0 d070bd64) failed
> ipmi at mainbus0 not configured
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
> "Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
> ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
> (0x4101): irq 5, address 00:15:60:09:d3:f6
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c
> pci3 at ppb2 bus 3
> bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
> (0x4101): irq 5, address 00:15:60:09:d3:f7
> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb3 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci5 at ppb4 bus 5
> "Intel IOxAPIC" rev 0x09 at pci4 dev 0 function 1 not configured
> ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> pci6 at ppb5 bus 6
> "Intel IOxAPIC" rev 0x09 at pci4 dev 0 function 3 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 11
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> pci7 at ppb6 bus 7
> vga1 at pci7 dev 1 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> "Intel 82801EB SATA" rev 0x02 at pci0 dev 31 function 2 not configured
> ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 10
> iic0 at ichiic0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wdc0 at isa0 port 0x1f0/8 irq 14
> wd0 at wdc0 channel 0 drive 0: <Maxtor 6L080M0>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(wdc0:0:0): using BIOS timings
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask efed netmask efed ttymask ffef
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
> --
> AlanP
--
Theatre is life
Film is art
Television is furniture
