On Tue, 15 Aug 2006, jared r r spiegel wrote: > it's onboard; i don't use that NIC anymore in favour of the em(4).
Speaking of em(4), does the Intel PRO/1000PT dual-port PCIe card work on 3.9 i386? This (http://archives.neohapsis.com/archives/openbsd/2006-07/0389.html) dmesg shows it working (presumably) on amd64, but the parent seems to indicate that it does not work. However, it's listed in the em(4) man page. I tried to use this card. em0 worked fine. But as soon as I would plug into em1 the whole machine would freeze. No panic, just frozen. The dmesg below shows one such boot with a lot of other devices stil in the machine. I also tried it stripped down and with all onboard devices (bge0, com0, lpt0) disabled in the bios with the same result. -- Kyle George [EMAIL PROTECTED] Dell PowerEdge SC420: OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID real mem = 526544896 (514204K) avail mem = 473415680 (462320K) using 4278 buffers containing 26431488 bytes (25812K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 02/06/06, BIOS32 rev. 0 @ 0xffe90 apm0 at bios0: Power Management spec V1.2 apm0: APM get power status: unknown error code? (83) apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/240 (13 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00) pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc0000/0x9800! 0xc9800/0x2800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x04 ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x04 pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 11, add ress xx:xx:xx:xx:xx:xx em1 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 3, addr ess xx:xx:xx:xx:xx:xx vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x04: aperture at 0xdff800 00, size 0x8000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): irq 11, address xx:xx:xx:xx:xx:xx brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03 pci3 at ppb2 bus 3 ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3 pci4 at ppb3 bus 4 skc0 at pci4 dev 1 function 0 "D-Link Systems DGE-560T_2" rev 0x11, Marvell Yuko n Lite (0x9): irq 10 sk0 at skc0 port A, address xx:xx:xx:xx:xx:xx eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 skc1 at pci4 dev 2 function 0 "D-Link Systems DGE-560T_2" rev 0x11, Marvell Yuko n Lite (0x9): irq 3 sk1 at skc1 port A, address xx:xx:xx:xx:xx:xx eephy1 at sk1 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 c onfigured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8483B, 1.05> SCSI0 5/cdrom r emovable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 5 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <WDC WD1600JS-55NCB1> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide1 channel 1 drive 0: <Maxtor 6Y080M0> wd1: 16-sector PIO, LBA, 76293MB, 156250000 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10 iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo biomask f765 netmask ff6d ttymask ffef pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302
