>> I have an older dual P3-800 Compaq DL360
>> Interestingly, the MP kernel does not see the second processor, even
>> though the BIOS detects it on power up (second dmesg below).
>
>interesting. I have such a machine (DL360) and have both CPUs detected
>just fine.
>I don't remember whether I had to fiddle with the BIOS to get both CPUs
>detected, I think I did have to. And I think it was about setting the
>OS type to *cough* linux *cough*
>(and yes, an update is due)
Setting the OS type to Unix->Linux in the BIOS appears to have worked.
Thanks!
OpenBSD 4.0 (GENERIC.MP) #933: Fri Sep 1 12:06:05 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE
real mem = 670642176 (654924K)
avail mem = 602988544 (588856K)
using 4256 buffers containing 33636352 bytes (32848K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMB
IOS rev. 2.3 @ 0xf206c (23 entries)
bios0: Compaq ProLiant DL360
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe8000/0x6000 0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4) (COMPAQ PROLIANT )
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE
..
