-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dimitry Andric napisa3(a):
> Try to get at least a dmesg and post it here, see:
> http://www.openbsd.org/faq/faq4.html#getdmesg
>
i get the same result on every kernel i used:
OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class, 2048KB L2 cache)
550 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 4026081280 (3931720K)
avail mem = 3669291008 (3583292K)
using 4278 buffers containing 201408512 bytes (196688K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 14 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x800
0xe8000/0x6000! 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ahc0 at pci0 dev 4 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: irq 5
scsibus0 at ahc0: 16 targets
ahc0: target 6 using 8bit transfers
ahc0: target 6 using asynchronous transfers
st0 at scsibus0 targ 6 lun 0: <QUANTUM, DLT7000, 2255> SCSI2
1/sequential removable
st0: drive empty or not ready
"Compaq PCI Hotplug" rev 0x11 at pci0 dev 11 function 0 not configured
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 12 function 0 not configured
vga1 at pci0 dev 13 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4d
pciide0 at pci0 dev 15 function 1 vendor "ServerWorks", unknown product
0x0210 rev 0x4a: DMA (unsupported), channel 0 configured to
compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom
removable
pciide0: channel 1 ignored (not responding; disabled or no drives?)
vendor "Corrollary", unknown product 0x1117 (class memory subclass RAM,
rev 0x05) at pci0 dev 20 function 0 not configured
vendor "Corrollary", unknown product 0x1117 (class memory subclass RAM,
rev 0x05) at pci0 dev 20 function 1 not configured
pchb0 at pci0 dev 25 function 0 vendor "Compaq", unknown product 0x6010
rev 0x01
pchb1 at pci0 dev 26 function 0 vendor "Compaq", unknown product 0x6010
rev 0x01
pchb2 at pci0 dev 27 function 0 vendor "Compaq", unknown product 0x6010
rev 0x01
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
fd0: timeout (st0 20<seek_cmplt> cyl 0)
fd0a: soft error reading fsbn 0
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFBUhK3VOnD+tUq3sRAoLJAJ9igmnaCtlQgeRhaVo3isERGR8ovACfQ9nh
YE8qhWyDxkwJ0TW3Q1gqSt4=
=b/BN
-----END PGP SIGNATURE-----
