Hi, I noticed file corruption with a ide drive mounted via an
external usb casing, so I fsck'ed the FFS filesystem with
fsck -fy /dev/sd0a
And after putting out a lot of data it gets stuck at:
-1808525061 BAD I=1937144
961017051 BAD I=1937144
427404402 BAD I=1937144
429040826 BAD I=1937144
-1176103257 BAD I=1937144
1349293579 BAD I=1937144
-1909004958 BAD I=1937144
897088942 BAD I=1937144
2028432268 BAD I=1937144
1940721529 BAD I=1937144
1020505834 BAD I=1937144
EXCESSIVE BAD BLKS I=1937144
CONTINUE? yes
When I look in the dmesg for useful info I get:
~% dmesg |egrep '(umass0|sd0)'
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
umass0: at uhub2 port 4 (addr 2) disconnected
sd0 detached
umass0 detached
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
umass0: at uhub2 port 4 (addr 2) disconnected
umass0: BBB bulk-in stall clear failed, IOERROR
sd0 detached
umass0 detached
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
umass0: at uhub2 port 4 (addr 2) disconnected
umass0: BBB bulk-in stall clear failed, IOERROR
sd0 detached
umass0 detached
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
Kind of odd since I simply booted with the device running and
didn't touch it.
Here is the complete dmesg
E to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/usr: optimization changed from SPACE to TIME
syncing disks... done
rebooting...
OpenBSD 4.0 (GENERIC) #1103: Thu Aug 31 19:36:08 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (785948K)
avail mem = 725688320 (708680K)
using 4256 buffers containing 40341504 bytes (39396K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0,
SMBIOS rev. 2.3 @ 0xf0630 (22 entries)
bios0: MSI MS-6380E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: irq 12, address
00:08:a1:3c:34:7a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
"unknown" at iic0 addr 0x2f not configured
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: soft error (corrected)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0: transfer error, downgrading to Ultra-DMA mode 5
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 16 of 16-31 (wd0 bn
79; cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-127 (wd0 bn
159; cn 0 tn 2 sn 33), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-127 (wd0 bn
159; cn 0 tn 2 sn 33), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0a: aborted command, interface CRC error writing fsbn 16 of 16-19 (wd0 bn
79; cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/usr: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
umass0: at uhub2 port 4 (addr 2) disconnected
sd0 detached
scsibus1 detached
umass0 detached
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
/var: optimization changed from SPACE to TIME
/var: optimization changed from TIME to SPACE
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
umass0: at uhub2 port 4 (addr 2) disconnected
umass0: BBB bulk-in stall clear failed, IOERROR
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
umass0: at uhub2 port 4 (addr 2) disconnected
umass0: BBB bulk-in stall clear failed, IOERROR
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
/var: optimization changed from SPACE to TIME
syncing disks... Stopped at Debugger+0x4: leave
ddb> rebooting...
OpenBSD 4.0 (GENERIC) #1103: Thu Aug 31 19:36:08 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (785948K)
avail mem = 725688320 (708680K)
using 4256 buffers containing 40341504 bytes (39396K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0,
SMBIOS rev. 2.3 @ 0xf0630 (22 entries)
bios0: MSI MS-6380E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: irq 12, address
00:08:a1:3c:34:7a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
"unknown" at iic0 addr 0x2f not configured
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Maxtor 6, Y160P0, 0 0> SCSI0 0/direct fixed
sd0: 156334MB, 156334 cyl, 64 head, 32 sec, 512 bytes/sec, 320173056 sec total
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 5
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: soft error (corrected)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 128 of 128-143 (wd0 bn
191; cn 0 tn 3 sn 2), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 128 of 128-143 (wd0 bn
191; cn 0 tn 3 sn 2), retrying
wd0: soft error (corrected)
WARNING: / was not properly unmounted
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0a: aborted command, interface CRC error writing fsbn 16 of 16-31 (wd0 bn
79; cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
/var: optimization changed from TIME to SPACE
# Han
