On Thu, Sep 14, 2006 at 10:22:03AM +0100, Stuart Henderson wrote:
> On 2006/09/14 11:03, Andreas Bihlmaier wrote:
> > With the newest i386 (quite old btw.) snapshot, I can use msk0 without
> > any troubles UNTIL I start X on the machine.
> > As soon as I do that interrupts go to 99% and everything starts to crawl
> > until I reboot. Pretty much same issue I had before with the difference
> > that I know the "cause".
> > I'll try another graphic card and will report back.
>
> have you tried bsd.mp? Some machines work a lot better when
> you use the APIC, and the easy way to do that is use an MP kernel.
Yes, with APIC in Bios enabled all USB ports stop working,
but the problem with interrupts DOES NOT OCCUR:
OpenBSD 4.0 (GENERIC.MP) #933: Fri Sep 1 12:06:05 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 2145873920 (2095580K)
avail mem = 1949335552 (1903648K)
using 4256 buffers containing 107397120 bytes (104880K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(24) BIOS, date 01/25/06, BIOS32 rev. 0 @ 0xf1e40,
SMBIOS rev. 2.3 @ 0xf0000 (69 entries)
bios0: ASUSTek Computer INC. A8V-E DELUXE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde40/320 (18 entries)
pcibios0: PCI Exclusive IRQs: 3 5 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xd000
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200 MHz
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfecc0000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8T890 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8T890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8T890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8T890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8T890 Host" rev 0x00
"VIA K8T890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 "VIA K8T890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon X600 (RV380)" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X600 (RV380) Sec" rev 0x00 at pci2 dev 0 function 1 not configured
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 3 function 1 "VIA K8T890 PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
ppb4 at pci0 dev 3 function 2 "VIA K8T890 PCI-PCI" rev 0x00
pci5 at ppb4 bus 5
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell
Yukon-2 EC rev. A3 (0x2): apic 2 int 23 (irq 11)
msk0 at mskc0 port A, address 00:11:d8:aa:4a:61
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb5 at pci0 dev 3 function 3 "VIA K8T890 PCI-PCI" rev 0x00
pci6 at ppb5 bus 6
emu0 at pci0 dev 12 function 0 "Creative Labs SoundBlaster Live" rev 0x08: apic
2 int 5 (irq 5)
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x08 at pci0 dev 12 function 1 not
configured
pciide0 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP2014N>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <AOpen, DVD-1640 PRO, 1.24> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4082B, A209> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 3 (irq
3)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 3 (irq
3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 5 (irq
5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 5 (irq
5)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86pci_intr_map: bus 0
dev 16 func 4 pin 3; line 11
pci_intr_map: no MP mapping found
: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
lm1 at iic0 addr 0x2f: W83791SD
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
ioapic0: pin 5 shares different IPL interrupts (40..90), degraded performance
pctr: user-level cycle counter enabled
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub4: device problem, disabling port 4
uhub0: device problem, disabling port 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
With APIC in BIOS disabled and bsd.mp, usb works, but interrupt flood:
OpenBSD 4.0 (GENERIC.MP) #933: Fri Sep 1 12:06:05 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 2145873920 (2095580K)
avail mem = 1949335552 (1903648K)
using 4256 buffers containing 107397120 bytes (104880K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(24) BIOS, date 01/25/06, BIOS32 rev. 0 @ 0xf1e40,
SMBIOS rev. 2.3 @ 0xf0000 (69 entries)
bios0: ASUSTek Computer INC. A8V-E DELUXE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde40/320 (18 entries)
pcibios0: PCI Exclusive IRQs: 3 5 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xd000
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8T890 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8T890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8T890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8T890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8T890 Host" rev 0x00
"VIA K8T890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 "VIA K8T890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon X600 (RV380)" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X600 (RV380) Sec" rev 0x00 at pci2 dev 0 function 1 not configured
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 3 function 1 "VIA K8T890 PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
ppb4 at pci0 dev 3 function 2 "VIA K8T890 PCI-PCI" rev 0x00
pci5 at ppb4 bus 5
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell
Yukon-2 EC rev. A3 (0x2): irq 11
msk0 at mskc0 port A, address 00:11:d8:aa:4a:61
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb5 at pci0 dev 3 function 3 "VIA K8T890 PCI-PCI" rev 0x00
pci6 at ppb5 bus 6
emu0 at pci0 dev 12 function 0 "Creative Labs SoundBlaster Live" rev 0x08: irq 5
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x08 at pci0 dev 12 function 1 not
configured
pciide0 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP2014N>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <AOpen, DVD-1640 PRO, 1.24> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4082B, A209> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
lm1 at iic0 addr 0x2f: W83791SD
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub4 port 4
uhub5: Standard Microsystems product 0xa700, rev 2.00/0.00, addr 2
uhub5: 3 ports with 3 removable, bus powered, multiple transaction translators
uhub6 at uhub0 port 2
uhub6: Lite-On Technology USB 1.1 2port downstream low power hub, rev
1.10/1.00, addr 2
uhub6: 3 ports with 2 removable, bus powered
uhidev0 at uhub6 port 1 configuration 1 interface 0
uhidev0: Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 ), rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub6 port 1 configuration 1 interface 1
uhidev1: Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 ), rev 1.10/1.00, addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub6 port 3 configuration 1 interface 0
uhidev2: Logitech USB-PS/2 Optical Mouse, rev 2.00/25.00, addr 4, iclass 3/1
ums0 at uhidev2: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
I'll try the patch ASAP.
Regards,
ahb
