On 9/19/06, Reyk Floeter <[EMAIL PROTECTED]> wrote:
hi,
i recently enabled support for some newer wireless chipsets from
atheros, like the AR2413, AR5413, and AR5424 single chip solutions.
please also test it if you have an intel-based mac - the integrated
wireless NIC is based on the pci express AR5424 chipset.
I just tested it with a snapshot from the 23th, on a 2Ghz Macbook (non Pro).
Here is my dmesg :
OpenBSD 4.0-current (RAMDISK_CD) #40: Sat Sep 23 12:43:03 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2
real mem = 503730176 (491924K)
avail mem = 452964352 (442348K)
using 4256 buffers containing 25288704 bytes (24696K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/29/05, SMBIOS rev. 2.4 @
0xe7440 (37 entries)
bios0: Apple Computer, Inc. MacBook1,1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xe600!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and
Frequency, rev 0x03) at pci0 dev 7 function 0 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22,
Marvell Yukon-2 EC rev. A3 (0x2): irq 11
msk0 at mskc0 port A, address 00:16:cb:cb:66:74
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 11
ar5k_ar5212_nic_wakeup: failed to resume the AR5212 (again)
ath0: unable to attach hardware; HAL status 22
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
"AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-857, HBE4> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <ST96812AS>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
npx0 at isa0 port 0xf0/16: using exception 16
biomask ffff netmask ffff ttymask ffff
rd0: fixed, 3800 blocks
uhub4: device problem, disabling port 4
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
uhidev1 at uhub1 port 1 configuration 1 interface 0uhidev2 at uhub2
port 2 configuration 1 interface 0ukbd0 at uhidev0
uhidev1: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1
uhidev2: Apple Computer, Inc. IR Receiver, rev 2.00/1.10, addr 2, iclass 3/0
ukbd1 at uhidev1
uhidev2: 38 report ids
uhid at uhidev2 reportid 36 not configured
uhid at uhidev2 reportid 37 not configured
uhid at uhidev2 reportid 38 not configured
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev3 at uhub3 port 1 configuration 1 interface 1
uhidev3: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub1 port 1 configuration 1 interface 1uhidev5 at uhub0
port 2 configuration 1 interface 0
uhidev4: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/0
uhid at uhidev3 not configured
uhidev4: 3 report ids
uhid at uhidev4 reportid 1 not configured
uhid at uhidev4 reportid 2 not configured
uhid at uhidev4 reportid 3 not configured
uhidev5: Apple Computer product 0x0218, rev 2.00/0.60, addr 2, iclass 3/1
uhidev5: no report descriptor
uhidev6 at uhub0 port 2 configuration 1 interface 1
uhidev6: vendor 0x05ac product 0x0218, rev 2.00/0.60, addr 2, iclass 3/1
uhidev6: no report descriptor
uhidev7 at uhub0 port 2 configuration 1 interface 2
uhidev7: vendor 0x05ac product 0x0218, rev 2.00/0.60, addr 2, iclass 3/0
uhidev7: no report descriptor
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: SanDisk Corporation product 0x5151, rev 2.00/0.10, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Micro, 0.1> SCSI2
0/direct removable
sd0: 1909MB, 1909 cyl, 64 head, 32 sec, 512 bytes/sec, 3911679 sec total
umass0: at uhub4 port 1 (addr 2) disconnected
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: SanDisk Corporation Cruzer Micro, rev 2.00/0.10, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Micro, 0.1> SCSI2
0/direct removable
sd0: 1909MB, 1909 cyl, 64 head, 32 sec, 512 bytes/sec, 3911679 sec total
Of course ifconfig doesn't show any ath0. This may be related to :
http://marc.theaimsgroup.com/?l=openbsd-misc&m=115588147812522&w=2
