Hi.
I have sensorsd running on a 4.0-current macppc.
It always worked fine and when min/max values of a sensor are
reached, a mail is sent to me.
Recently, a problem happened: each time I start the sensorsd daemon
(either on boot up or manually), I get the following warning mail:
28.00 degC (high=60.01 degC)
Strange since I only set up high value for this one, and not low.
# extract from /etc/sensorsd.conf
hw.sensors.7:high=60C:\
:command=echo "%2 \(high=%4\)" \
| mail -s "[`hostname`] sensorsd WARNING \(CPU Temp.\)" root
For info:
$ sysctl hw
hw.machine=macppc
hw.model=7447A (Revision 0x101)
hw.ncpu=1
hw.byteorder=4321
hw.physmem=536870912
hw.usermem=535818240
hw.pagesize=4096
hw.disknames=cd0,wd0
hw.diskcount=2
hw.sensors.0=adt0, +2.5Vin, 1.45 V DC
hw.sensors.1=adt0, Vccp, 0.00 V DC
hw.sensors.2=adt0, Vcc, 3.32 V DC
hw.sensors.3=adt0, +5V, 0.00 V DC
hw.sensors.4=adt0, +12V, 0.00 V DC
hw.sensors.5=adt0, Remote1 Temp, 43.00 degC
hw.sensors.6=adt0, Internal Temp, 43.00 degC
hw.sensors.7=adt0, Remote2 Temp, 44.00 degC
hw.cpuspeed=1499
hw.product=PowerBook5,5
OpenBSD 4.0 (GENERIC) #1056: Sat Sep 16 21:21:14 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (524288K)
avail mem = 482914304 (471596K)
using 1254 buffers containing 26841088 bytes (26212K) of memory
mainbus0 (root): model PowerBook5,5
cpu0 at mainbus0: 7447A (Revision 0x101): 1499 MHz: 512KB L2 cache
memc0 at mainbus0: uni-n
"hw-clock" at memc0 not configured
ki2c0 at memc0 offset 0xf8001000
iic0 at ki2c0
adt0 at iic0 addr 0xae: adt7460 rev 0x6a
"lmu-controller" at iic0 addr 0x42 not configured
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility M10 NP" rev 0x00,
mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
"Broadcom BCM4306" rev 0x03 at pci1 dev 18 function 0 not configured
cbb0 at pci1 dev 19 function 0 "TI PCI1510 CardBus" rev 0x00: irq 53
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 offset 0x9 irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"cpu-vcore-select" at macgpio0 offset 0x6b not configured
"gpio4" at macgpio0 offset 0x1e not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio4" at macgpio0 offset 0x5c not configured
"gpio11" at macgpio0 offset 0x75 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 61% charged
pi2c0 at adb0
iic1 at pi2c0
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
ki2c1 at macobio0 offset 0x18000
iic2 at ki2c1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-825, DAND> SCSI0 5/cdrom
removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
audio0 at snapper0
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29,
version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
usb3 at ohci3: USB revision 1.0
uhub3 at usb3
uhub3: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
usb4 at ohci4: USB revision 1.0
uhub4 at usb4
uhub4: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb5 at ehci0: USB revision 2.0
uhub5 at usb5
uhub5: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <Hitachi IC25N080ATMR04-0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not
configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41,
address 00:0d:93:3c:64:8a
eephy0 at gem0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 1
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
Apple Computer ADB device, class 0/0, rev 2.00/15.86, addr 2, uhub2 port 1
not configured
bootpath: '/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
Cheers!
--
Antoine
