On 9/25/06, ip <[EMAIL PROTECTED]> wrote:
I'm thinking to buy the Belink F5D7050USB 2.0 802.11b/g adapter,
listed in i386 hardware list.
Chipset Ralink RT2500 -> ural driver.
And I hope it working in g mode...
Cheers,
--
ip
Argh.. I have bought it...but when I have inserted it, the message is been:
$dmesg
ugen0 at uhub5 port 1
ugen0: Belkin USB2.0 WLAN, rev 2.00/48.10, addr 2
$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:59:b7:62:8b
groups: egress
media: Ethernet 100baseTX full-duplex
status: active
inet 192.168.2.2 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::2d0:59ff:feb7:628b%fxp0 prefixlen 64 scopeid 0x1
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1460
enc0: flags=0<> mtu 1536
No ural0...even if the model that I have bought is the F5D7050, how is
reported in i386 hardware compatibility list :(((
And from man page...
The following USB 2.0 adapters should work:
AMIT WL532U. ASUS WL-167g. Belkin F5D7050 v2000. Buffalo WLI-U2-KG54.
...
Why the system doesn't recognize it ?
--
ip
