here is a ppp-logfile attached. at 19:23:09 I tried to kill and restart
ppp, if I remember correctly.
What am I supposed to read from the man page for ppp to help me in this
case, please?
Thanks for the help,
Tim
--
Tim Gruene
Institut fuer anorganische Chemie
Tammannstr. 4
D-37077 Goettingen
GPG Key ID = A46BEE1A
On Sun, 22 Oct 2006, ramrunner wrote:
> Can you send your ppp logs?
> man 8 ppp
> Thanks :)
> DsP
>
> On 10/21/06, Tim Gruene <[EMAIL PROTECTED]> wrote:
>> Hi,
>>
>> I recently installed OpenBSD 3.9 on a PC(dmesg.log attached) which should
>> act as gateway for a small home network. The setup of pf, the config-file
>> for ppp to connect to our ISP, and the system setup (rc.conf.local) were
>> copied from a different machine running OpenBSD 3.6 which currently acts
>> as gateway but should be replaced by the other machine.
>>
>> After booting, the machine works fine for about 15min. Thereafter the
>> connection through the DLS-modem to the internet is down. According to
>> 'top', ppp and pppoe are in sleep state, but I do not know whether this is
>> the reason.
>>
>> Killing ppp and restarting it does not help.
>>
>> The phenomenon occurs with apm enabled and disabled. It is not due to the
>> network card for I had also installed a different network card (a 3Com
>> 3c905b instead of the VIA VT8233).
>>
>> Would anyone have an idea how to fix the problem?
>>
>> Tim
>>
>> --
>> Tim Gruene
>> Institut fuer anorganische Chemie
>> Tammannstr. 4
>> D-37077 Goettingen
>>
>> GPG Key ID = A46BEE1A
>> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
>>
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
>>
>> cpu0: Intel(R) Celeron(R) CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz
>>
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
>>
>> real mem = 259567616 (253484K)
>>
>> avail mem = 229863424 (224476K)
>>
>> using 3194 buffers containing 13082624 bytes (12776K) of memory
>>
>> mainbus0 (root)
>>
>> bios0 at mainbus0: AT/286+(3c) BIOS, date 10/01/03, BIOS32 rev. 0 @ 0xfb4c0
>>
>> apm0 at bios0: Power Management spec V1.2
>>
>> apm0: AC on, battery charge unknown
>>
>> apm0: flags 70102 dobusy 1 doidle 1
>>
>> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44
>>
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/128 (6 entries)
>>
>> pcibios0: PCI Exclusive IRQs: 3 5 11 12
>>
>> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
>>
>> pcibios0: PCI bus #1 is the last bus
>>
>> bios0: ROM list: 0xc0000/0xc000
>>
>> cpu0 at mainbus0
>>
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>>
>> pchb0 at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00
>>
>> ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
>>
>> pci1 at ppb0 bus 1
>>
>> vga1 at pci1 dev 0 function 0 "S3 ProSavage DDR" rev 0x00
>>
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>>
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>
>> sis0 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
>> 11, address 00:14:6c:30:8b:1c
>>
>> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
>>
>> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
>>
>> usb0 at uhci0: USB revision 1.0
>>
>> uhub0 at usb0
>>
>> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
>>
>> uhub0: 2 ports with 2 removable, self powered
>>
>> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 3
>>
>> usb1 at uhci1: USB revision 1.0
>>
>> uhub1 at usb1
>>
>> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
>>
>> uhub1: 2 ports with 2 removable, self powered
>>
>> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 12
>>
>> usb2 at uhci2: USB revision 1.0
>>
>> uhub2 at usb2
>>
>> uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
>>
>> uhub2: 2 ports with 2 removable, self powered
>>
>> ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
>>
>> usb3 at ehci0: USB revision 2.0
>>
>> uhub3 at usb3
>>
>> uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
>>
>> uhub3: 6 ports with 6 removable, self powered
>>
>> viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
>>
>> iic0 at viapm0
>>
>> "unknown" at iic0 addr 0x18 not configured
>>
>> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>>
>> wd0 at pciide0 channel 0 drive 0: <ST340015A>
>>
>> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
>>
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>>
>> atapiscsi0 at pciide0 channel 1 drive 0
>>
>> scsibus0 at atapiscsi0: 2 targets
>>
>> cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SM-352B, T806> SCSI0
>> 5/cdrom removable
>>
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>>
>> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 12
>>
>> ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
>>
>> audio0 at auvia0
>>
>> "VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
>>
>> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
>> 00:e0:4c:b7:dd:45
>>
>> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI
>> 0x004063, model 0x0032
>>
>> isa0 at mainbus0
>>
>> isadma0 at isa0
>>
>> pckbc0 at isa0 port 0x60/5
>>
>> pckbd0 at pckbc0 (kbd slot)
>>
>> pckbc0: using irq 1 for kbd slot
>>
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>
>> pcppi0 at isa0 port 0x61
>>
>> midi0 at pcppi0: <PC speaker>
>>
>> spkr0 at pcppi0
>>
>> lpt0 at isa0 port 0x378/4 irq 7
>>
>> it0 at isa0 port 0x290/8: IT87
>>
>> npx0 at isa0 port 0xf0/16: using exception 16
>>
>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>>
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>>
>> biomask ff6d netmask ff6d ttymask ffef
>>
>> pctr: user-level cycle counter enabled
>>
>> dkcsum: wd0 matches BIOS drive 0x80
>>
>> root on wd0a
>>
>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
[demime 1.01d removed an attachment of type APPLICATION/octet-stream which had
a name of ppp.log.3.gz]
