http://www.openbsd.org/faq/faq12.html#aac
On 01/11/06, tobias Freitag <[EMAIL PROTECTED]> wrote:
Hi list, we (OpenBSD newbies) trying to install OpenBSD on a HP NetServer LC 3. The harddisks are connected with a scsi controller (Adaptec AIC-7880) that should be supported by OpenBSD 3.9 and 4.0, but both fail to load the driver. So no harddisks, no luck dmesg.boot is attached -- GMX DSL-Flatrate 0,- Euro* - \berall, wo DSL verf|gbar ist! NEU: Jetzt bis zu 16.000 kBit/s! http://www.gmx.net/de/go/dsl OpenBSD 4.0 (RAMDISKB) #34: Sat Sep 16 19:42:22 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISKB cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 450 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 268005376 (261724K) avail mem = 240054272 (234428K) using 3297 buffers containing 13504512 bytes (13188K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(d1) BIOS, date 05/01/00, BIOS32 rev. 0 @ 0xfd806 pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries) pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus WARNING: can't reserve area for I/O APIC. bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03 pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-532E-B, 2.1A> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) "Intel 82371AB USB" rev 0x01 at pci0 dev 4 function 2 not configured "Intel 82371AB Power" rev 0x02 at pci0 dev 4 function 3 not configured ppb0 at pci0 dev 7 function 0 "DEC 21152 PCI-PCI" rev 0x03 pci1 at ppb0 bus 1 fxp0 at pci0 dev 8 function 0 "Intel 8255x" rev 0x05, i82558: irq 11, address 00:90:27:b6:89:5c inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0 "NS DP83815 10/100" rev 0x00 at pci0 dev 9 function 0 not configured "Adaptec AIC-7880" rev 0x01 at pci0 dev 10 function 0 not configured vga1 at pci0 dev 13 function 0 "Cirrus Logic CL-GD5446" rev 0x45 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask f7e5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
