sorry for answering myself, but i forgot the dmesg:
~ $ dmesg
OpenBSD 4.0-current (GENERIC) #1: Wed Nov 8 19:19:54 CET 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 743 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 266870784 (260616K)
avail mem = 235651072 (230128K)
using 3288 buffers containing 13467648 bytes (13152K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b4) BIOS, date 10/04/00, BIOS32 rev. 0 @
0xf0b90, SMBIOS rev. 2.3 @ 0xf28f0 (45 entries)
bios0: ASUSTeK Computer INC. CUSL2
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
apm0: flags b0102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x13c2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1300/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active,
8Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02: aperture
at 0xf8000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x01
pci1 at ppb0 bus 1
xl0 at pci1 dev 9 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 5,
address 00:60:08:2d:35:9e
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6L080P0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-ROM DVD-120S, 1.01> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x01: irq 7
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x01: irq 10
iic0 at ichiic0
lm1 at iic0 addr 0x2d: AS99127F
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x01: irq 6
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffcd netmask ffed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub2 at uhub1 port 2
uhub2: ALCOR Generic USB Hub, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Internet Keyboard Pro, rev 1.10/1.14, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Microsoft Internet Keyboard Pro, rev 1.10/1.14, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub0 port 2 configuration 1 interface 2
uhidev2: Microsoft Internet Keyboard Pro, rev 1.10/1.14, addr 2, iclass 3/1
ums0 at uhidev2: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Marc Peters schrieb:
hi folks,
since yesterday i try to build stable out of the cvs-sources from
anoncvs.de.openbsd.org without success. it crashes every now and then
during the userland build-process (never during the kernel-build). i
checked the ram with memtest86 and it showed no errors. i changed the
harddisk, but the new one shows the same odd behaviour.
cc -O2 -pipe -g -DLIBC_SCCS -DSYSLIBC_SCCS -I/usr/src/lib/libc/include
-DAPIWARN -DYP -I/usr/src/lib/libc/yp -D__DBINTERFACE_PRIVATE
-I/usr/src/lib/libc -DRESOLVSORT -DPOSIX_MISTAKE -DFLOATING_POINT -DNLS
-c -p /usr/src/lib/libc/gen/_sys_siglist.c -o _sys_siglist.po
cc: Internal error: Segmentation fault (program as)
Please submit a full bug report.
See <URL:http://gcc.gnu.org/bugs.html> for instructions.
*** Error code 1
Stop in /usr/src/lib/libc.
*** Error code 1
Stop in /usr/src/lib.
*** Error code 1
Stop in /usr/src (line 73 of Makefile).
this time i did a complete checkout from this morning. it stopped with
segfaults during some libs yesterday, and this morning i even had an
syntax error during building of the libc.
is the cpu flaky? anything else?
anyone, who can point me in the right direction?
tia,
marc
