On Sat, Dec 16, 2006 at 04:45:47AM -0600, Sam Fourman Jr. wrote:
> Hello misc@
>
> I am having trouble running gpsd Maybe I have the startup syntax
> wrong, I Included as much information as I know how to retrive
>
> My question is the Delorme USB GPS supported on OpenBSD the Earthmate
> USB device does sat model #9538 v 1.0 on a sticker on the bottom of
> the device.
>
> here the long out put starts.
>
> OpenBSD 4.0-current (GENERIC) #1263: Tue Dec 12 19:56:25 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16
> real mem = 526544896 (514204K)
> avail mem = 472215552 (461148K)
> using 4256 buffers containing 26451968 bytes (25832K) of memory
> User Kernel Config
> UKC> enable acpi
> 384 acpi0 enabled
> UKC>
> UKC> quit
> Continuing...
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(e5) BIOS, date 02/17/09, BIOS32 rev. 0 @
> 0xfd610, SMBIOS rev. 2.4 @ 0xdc010 (42 entries)
> bios0: LENOVO 0768DKU
> pcibios0 at bios0: rev 2.1 @ 0xfd610/0x9f0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xdc000/0x4000!
> 0xe0000/0x1800!
> acpi0 at mainbus0: rev 2
> acpi0: tables DSDT FACP APIC HPET MCFG TCPA APIC BOOT SSDT SSDT SSDT SSDT
> SSDT
> acpitimer at acpi0 not configured
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 0 (PEGP)
> acpiprt2 at acpi0: bus 1 (RP01)
> acpiprt3 at acpi0: bus 2 (RP02)
> acpiprt4 at acpi0: bus 3 (PCIB)
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> acpiac at acpi0 not configured
> acpiec at acpi0 not configured
> acpibat at acpi0 not configured
> acpitz at acpi0 not configured
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture
> at 0xd0200000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: 0x04x/0x11d4 (rev. 5.0), HDA version 1.0
> azalia0: codec: 0x04x/0x11c1 (rev. 2.0), HDA version 1.0
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
> pci2 at ppb1 bus 2
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> irq 7, address 00:18:de:2c:a8:a3
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 10
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 5
> ehci0: timed out waiting for BIOS
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci3 at ppb2 bus 3
> rl0 at pci3 dev 1 function 0 "Realtek 8139" rev 0x10: irq 10, address
> 00:0f:b0:cc:44:41
> rlphy0 at rl0 phy 0: RTL internal PHY
> cbb0 at pci3 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 10
> "Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 6 function 0 not configured
> sdhc0 at pci3 dev 6 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: irq 5
> sdmmc0 at sdhc0
> "Ricoh 5C843" rev 0x01 at pci3 dev 6 function 2 not configured
> "Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 6 function 3 not configured
> "Ricoh 5C852 xD" rev 0x05 at pci3 dev 6 function 4 not configured
> cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS541080G9SA00>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GMA-4082N, HA01> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 10
> iic0 at ichiic0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask ef7d netmask effd ttymask ffff
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub3 port 1 configuration 1 interface 0
> uhidev0: DeLorme Publishing DeLorme USB Earthmate, rev 1.00/0.04, addr
> 2, iclass 3/0
> ucycom0 at uhidev0
> ucom0 at ucycom0 portno 0
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 addr 2: full speed, power 100 mA, config 1, DeLorme USB
> Earthmate(0x0100), DeLorme Publishing(0x1163), rev 0.04
> port 2 powered
> Controller /dev/usb4:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
> port 5 powered
> port 6 powered
> port 7 powered
> port 8 powered
>
>
> # gpsd -nN -D 6 /dev/ucycom0
> gpsd: launching (Version 2.33)
> gpsd: listening on port 2947
> gpsd: running with effective group ID 0
> gpsd: running with effective user ID 0
> gpsd: opening GPS data source at '/dev/ucycom0'
> gpsd: device open failed: No such file or directory
> gpsd: GPS device /dev/ucycom0 nonexistent or can't be read
>
>
> Maybe I am doing something Wrong
The part where it says that device does not exist... means what it says
Have a look at the ucom(4) man page, you probably want
/dev/cuaU0
