Hello folks,
Anyone help me?
This is my dmesg
OpenBSD 4.0 (NEIN) #0: Sun Dec 17 05:20:14 BRST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NEIN
cpu0: Intel(R) Celeron(R) M processor 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 258437120 (252380K)
avail mem = 227995648 (222652K)
using 3180 buffers containing 13025280 bytes (12720K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b1) BIOS, date 02/24/06, BIOS32 rev. 0 @
0xfd4b0, SMBIOS rev. 2.31 @ 0xdc010 (32 entries)
bios0: Acer TravelMate 2420
pcibios0 at bios0: rev 2.1 @ 0xfd4b0/0xb50
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf200! 0xdc000/0x4000! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x03:
aperture at 0xb0080000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 1
vendor "Atheros", unknown product 0x001a (class network subclass
ethernet, rev 0x01) at pci1 dev 5 function 0 not configured
rl0 at pci1 dev 7 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:0a:e4:fa:82:2b
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci1 dev 9 function 0 "ENE CB-1410 CardBus" rev
0x01pci_intr_map: no mapping for pin A
: couldn't map interrupt
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq
10, ICH6 AC97
ac97: codec id 0x414c4761 (Avance Logic ALC655 rev 1)
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <HTS421240H9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, CDRW/DVD SCB5265, TX11> SCSI0
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 3, polling enabled
biomask ebf5 netmask eff5 ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
auich0: measured ac97 link rate at 48011 Hz, will use 48000 Hz
2006/12/17, Eduardo Jorge <[EMAIL PROTECTED]>:
Hi,
I have a Atheros AR5BMB5, and I run openbsd 4.0, and atheros don`t work.
Can anyone help me?
--
Serrano Neves - a.k.a eth0 / www.eth0.eti.br
Realmente Seguro? http://secure.eth0.eti.br
"Talk is cheap. Show me the code." - Linus Torvalds
--
Serrano Neves - a.k.a eth0 / www.eth0.eti.br
Realmente Seguro? http://secure.eth0.eti.br
"Talk is cheap. Show me the code." - Linus Torvalds
