>From Marco Peereboom <[EMAIL PROTECTED]>
>There seem to be interrupt routing issues on your box. Try booting
>with -c and enable acpi. You have to install a very recent snapshot
for this to have a chance.
>Please report that dmesg to the list.
Here it is ...
I've experienced some severe data losses.
I'm using a 2x raid5 and 1x raid0 drive (mounted as /home/sources), when
booting with acpi the (raid0) drive is always busy and most of the data
is always lost after the next reboot?!!
Here is the dmesg with acpi and a bioctl output and the mount ouput:
$ sudo mount -a
mount_ffs: /dev/sd1e on /home/sources: Device busy
$ sudo mount
/dev/sd0a on / type ffs (local, softdep)
/dev/sd1a on /tmp type ffs (local, nodev, nosuid, softdep)
/dev/sd0e on /usr type ffs (local, nodev, softdep)
/dev/sd1d on /usr/obj type ffs (local, nodev, nosuid, softdep)
/dev/sd0d on /var type ffs (local, nodev, nosuid, softdep)
/dev/sd1e on /home/sources type ffs (local, nodev, softdep)
/dev/sd2d on /home type ffs (local, softdep)
$ sudo bioctl ami0
Volume Status Size Device
ami0 0 Online 104857600000 sd0 RAID5
0 Online 400016015360 0:0.0 noencl < ST3400833NS
3.AE>
1 Online 400016015360 0:1.0 noencl < ST3400833NS
3.AE>
2 Online 400016015360 0:2.0 noencl < ST3400833NS
3.AE>
ami0 1 Online 52426702848 sd1 RAID0
0 Online 400016015360 0:0.0 noencl < ST3400833NS
3.AE>
1 Online 400016015360 0:1.0 noencl < ST3400833NS
3.AE>
2 Online 400016015360 0:2.0 noencl < ST3400833NS
3.AE>
ami0 2 Online 660189741056 sd2 RAID5
0 Online 400016015360 0:0.0 noencl < ST3400833NS
3.AE>
1 Online 400016015360 0:1.0 noencl < ST3400833NS
3.AE>
2 Online 400016015360 0:2.0 noencl < ST3400833NS
3.AE>
OpenBSD 4.0-current (GENERIC) #0: Thu Dec 21 19:40:07 CET 2006
[EMAIL PROTECTED]:/home/sources/src/sys/arch/amd64/compile/GENERIC
real mem = 3220303872 (3144828K)
avail mem = 2757574656 (2692944K)
using 22937 buffers containing 322236416 bytes (314684K) of memory
User Kernel Config
UKC> enable acpi
251 acpi0 enabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0690 (74 entries)
bios0: stem manufacturer P5WDG2 WS PRO
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC OEMB HPET MCFG
acpitimer at acpi0 not configured
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table OEMB not configured
acpi device at acpi0 from table HPET not configured
acpi device at acpi0 from table MCFG not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus 0 (P0P2)
acpiprt3 at acpi0: bus 1 (P0P3)
acpiprt4 at acpi0: bus 3 (P0P8)
acpiprt5 at acpi0: bus 2 (P0P9)
acpiprt6 at acpi0: bus 4 (P0P4)
acpiprt7 at acpi0: bus 5 (PXHA)
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, 2671.59 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG
cpu0: 4MB 64b/line 16-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c
rev 0xc0
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev
0xc0
pci1 at ppb0 bus 7
vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 5
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x11d4 (rev. 2.0), HDA version 1.0
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 5
ppb3 at pci3 dev 2 function 0 "Intel IOP331 PCIX-PCIX" rev 0x0a
pci4 at ppb3 bus 6
ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev
0x0a: irq 11
ami0: LSI 3008, 32b, FW 814D, BIOS vH431, 128MB RAM
ami0: 1 channels, 0 FC loops, 3 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 100000MB, 100000 cyl, 64 head, 32 sec, 512 bytes/sec, 204800000 sec
total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 49998MB, 49998 cyl, 64 head, 32 sec, 512 bytes/sec, 102395904 sec total
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed
sd2: 629606MB, 629606 cyl, 64 head, 32 sec, 512 bytes/sec, 1289433088
sec total
scsibus1 at ami0: 16 targets
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 3
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Marvell
Yukon-2 EC rev. A3 (0x2): irq 11
msk0 at mskc0 port A, address 00:18:f3:29:a2:53
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 2
vendor "Marvell", unknown product 0x6141 (class mass storage subclass
SATA, rev 0x01) at pci6 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci7 at ppb6 bus 1
"TI TSB43AB22 FireWire" rev 0x00 at pci7 dev 3 function 0 not configured
skc0 at pci7 dev 5 function 0 "Marvell Yukon 88E8001/8003/8010" rev
0x14, Marvell Yukon Lite (0x9): irq 5
sk0 at skc0 port A, address 00:18:f3:29:a2:54
eephy1 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4571A, 1-01> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus3 at atapiscsi1: 2 targets
cd1 at scsibus3 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xc1)
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
