On Dec 22, 2006, at 6:59 AM, Brian Keefer wrote:
On Dec 22, 2006, at 3:09 AM, Reyk Floeter wrote:
can you try 4.0-current (or a recent snapshot)? it should use the new
vic(4) driver instead of pcn(4).
I added Ethernet0.virtualDev to "vmxnet" (wasn't present by
default) and this is what I got with the latest i386 snap:
vic0 at pci2 dev 0 function 0 "VMware Virtual NIC" rev 0x10: apic 2
int 18 (irq 9)
vic0: VMXnet 864F, address 00:0c:29:c9:d7:96
Boots fine, but when it searches for DHCP lease I get:
vic0: no link ............. giving up
I tried to ifconfig vic0 down ; ifconfig vic0 up, but it still
didn't get a link.
Both stable and current work fine on my new MBP (Core 2 Duo
2.33GHz). vic grabs a NAT fine in stable, pcn in current.
# sysctl hw
hw.machine=i386
hw.model=Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz ("GenuineIntel" 686-
class)
hw.ncpu=2
hw.byteorder=1234
hw.physmem=267939840
hw.usermem=267927552
hw.pagesize=4096
hw.disknames=wd0,cd0
hw.diskcount=2
hw.cpuspeed=2328
hw.vendor=VMware, Inc.
hw.product=VMware Virtual Platform
hw.version=None
hw.serialno=VMware-56 4d 0b 8d 44 53 f8 c2-8e 13 fa e0 1b 15 bd b8
hw.uuid=564d0b8d-4453-f8c2-8e13-fae01b15bdb8
# dmesg
OpenBSD 4.0-current (GENERIC.MP) #1106: Wed Dec 20 14:22:11 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz ("GenuineIntel" 686-
class) 2.33 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3,DS-CPL,CX16
real mem = 267939840 (261660K)
avail mem = 236470272 (230928K)
using 3302 buffers containing 13524992 bytes (13208K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(4a) BIOS, date 12/06/06, BIOS32 rev. 0 @
0xfd880, SMBIOS rev. 2.31 @ 0xe0010 (45 entries)
bios0: VMware, Inc. VMware Virtual Platform
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
0xe0000/0x4000!
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 65 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz ("GenuineIntel" 686-
class) 2.33 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3,DS-CPL,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
wd0: 64-sector PIO, LBA, 4096MB, 8388608 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00>
SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08:
SMBus disabled
vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
bha3 at pci0 dev 16 function 0 "BusLogic MultiMaster" rev 0x01: apic
2 int 17 (irq 11), BusLogic 9xxC SCSI
bha3: model BT-958, firmware 5.07B
bha3: sync, parity
scsibus1 at bha3: 8 targets
ppb1 at pci0 dev 17 function 0 vendor "VMware", unknown product
0x0790 rev 0x01
pci2 at ppb1 bus 2
pcn0 at pci2 dev 0 function 0 "AMD 79c970 PCnet-PCI" rev 0x10,
Am79c970A, rev 0: apic 2 int 18 (irq 9), address 00:0c:29:15:bd:b8
eap0 at pci2 dev 1 function 0 "Ensoniq AudioPCI97" rev 0x02: apic 2
int 19 (irq 10)
ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3)
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Jason Dixon
DixonGroup Consulting
http://www.dixongroup.net
