The i386 21 Dec snapshot seems to
have a problem with device adt.

The install went fine, but upon reboot of
the new OS, it was hung at:

iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d100 rev 0x68


And I cannot seem to bypass by disabling in UKC ?

Here are the logs:

rebooting...
>> OpenBSD/i386 BOOT 2.12t)
bios0 a
boot>bus0:
booting hd0a:/bsd: 5573716+869404 [52+284400+264819]=0x6ab37c
entry point at 0x200120*ies)
bios0: Int
[ using 549644 bytes of bsd ELF symbol table ]
apm0 at bios0: Power Management spec V
Copyright (c) 1982, 1986, 1989, 1991, 1993
apm0: AC on, battery charge unknown, est
        The Regents of the University of California.  All rights
reserved.apm0: flags 30102 dobusy 0 doidle 1
pci
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000

OpenBSD 4.0-current (GENERIC) #1309: Thu Dec 21 19
acpi at mainbus0 not c
boot>
booting fd0a:/bsd: 4666580+740868=0x528420
real mem  = 2144796672 (2094528K)y point at 0x200120,
avail mem = 1948184576 (1902524K)1986, 1989, 1991, 1993
using 4256 buffers containing 107425792 bytes (104908K) of memoryity of
California.  All rights reserved.
RTC BIOS diagnostic erro
5 entries) 21 19:47:
bios0: Intel Corporation D975XBX
apm0 at bios0: Power Management spec
V1.2:/usr/src/sys/arch/i386/compile/RAMDISK_C
apm0: AC on, battery charge unknown, estimated 0:00 hours
RTC BIOS diagnostic error 80<clock_battery>
apm0: flags 30102 dobusy 0 doidle 1
cpu0: Intel(R) Core(TM)2 Du
pcibios at bios0 function 0x1a not configureds) 2.94
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000
0xd1000/0x100086,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,P
acpi at mainbus0 not configured
cpu0 at mainbus0
LUSH,DS,
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)VMX,EST,TM2,CX16
vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00286+(00) BIOS,
date 11/29/06, SMBIOS rev. 2.3 @ 0xe4cc0
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
5 entries)
bios0: Intel
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)m0 at bios0: Power
Management spec V1.2
"ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
pcibios at bios0 function 0x1a not configu
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq
9x10000 0xd0000/0x1000 0xd1000/0x1000
azalia0: host: High Defi
ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x011 function 0
vendor "Intel", unknown product 0x277d rev 0x0
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
vga1 at pci1 dev 0 function 0 "ATI Radeo
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: irq 10,
addre00 emulation)
"ATI Rad
ss 00:16:76:6e:58:db0 at pci1 dev 0 func
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
"Intel 82801GB HD Audio" rev 0x01 at pci0 dev
usb0 at uhci0: USB revision
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 9 ppb2
bus 3
ppb3 at pci0 dev 28 function 5 "Intel
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
pci4 at
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1ction 0 "Intel PRO/1000MT
(82573L)" rev 0x00: irq
uhub1: 2 ports with 2 removable, self powered

uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 4 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GH LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 9 for native-PCI interrupt
pciide0: couldn't map channel 0 cmd regs
pciide0: couldn't map channel 1 cmd regs
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 9
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d100 rev 0x68

---- hangs at this point ----
---- unless UKC> disable pciide
-----
-------------------------------------------------
Here is the verbose output:

>>> admcts probe returned 0
>>> probing for asbtm*
>>> asbtm probe returned 0
>>> probing for wbenv*
>>> wbenv probe returned 0
>>> probing for glenv*
>>> glenv probe returned 0
>>> adt probe won
adt0 at iic0 addr 0x2e: emc6d100 rev 0x68


--------------------------------------------------
Now disable adt using UKC


Try to disable adt

boot> boot -c
booting hd0a:/bsd: 5573716+869404 [52+284400+264819]=0x6ab37c
entry point at 0x200120*
[ using 549644 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.0-current (GENERIC) #1309: Thu Dec 21 19:22:12 MST 2006
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Core(TM)2 Duo CPU X6800 @ 2.93GHz ("GenuineIntel"
686-class) 2.94
 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
real mem  = 2144796672 (2094528K)
avail mem = 1948184576 (1902524K)
using 4256 buffers containing 107425792 bytes (104908K) of memory
User Kernel Config
UKC> disable adt
374 adt* disabled
UKC>


some stuff omitted.....




>>> admtmp probe returned 00>> ubsec probe returned
>>
>>> probing for admtt*tg
>>> probin
>>> re p
>>> admtt probe returned 0 safe probe
>>> probing fo
>>> probing for maxds*>
>>> probing for glenv*
>>> glenv probe returned 0
>>> no winning probe
"emc6d100" at iic0 addr 0x2e not configured
iic0: addr 0x2e 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
09=00 0a=0
0 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=00 12=00 13=00 14=00 15=00 16=00
17=00
18=00 19=00 1a=00 1b=00 1c=00 1d=00 1e=00 1f=00 20=72 21=6a 22=bf 23=c6
24=c2 25
=35 26=27 27=23 28=98 29=16 2e=57 2f=20 30=6f 31=4c 32=4c 33=00 34=00
35=00 36=0
0 37=00 38=00 39=00 3a=00 3b=00 3c=00 3d=00 3e=5c 3f=68 40=05 41=00 42=00
43=00
44=00 46=00 48=00 4a=00 4c=00 4e=81 4f=7f 50=81 51=7f 52=81 53=7f 5c=02
5d=22 5e
=22 5f=7a 60=8a 61=80 62=e8 63=88 64=33 65=4c 66=4c 67=32 68=2d 69=2d
6a=3f 6b=4
1 6c=41 6d=24 6e=40 6f=00 70=6f 71=4c 72=4c 73=09 74=09 75=09 76=09 77=09
78=09
79=00 7a=10 7b=00 7c=40 7d=00 7e=ec 7f=18 80=1e 81=a4 82=0e 83=00 84=00
85=09 86
=61 87=a8 88=4f 89=00 8a=40 8b=40 8c=09 8d=09 8e=0b 8f=00 90=04 91=04
92=04 93=0
4 94=0c 95=0c 96=0c 97=5a 98=f1 99=00 9a=00 9b=00 9c=23 9d=00 9e=00 9f=00
a0=00
a1=00 a2=00 a3=00 a4=00 a5=00 a6=00 a7=00 a8=00 a9=00 aa=00 ab=00 ac=00
ad=00 ae
=00 af=00 b0=00 b1=00 b2=00 b3=00 b4=00 b5=00 b6=00 b7=00 b8=00 b9=00
ba=00 bb=0
0 bc=00 bd=00 be=00 bf=00 c0=00 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=00
c8=00
c9=00 ca=00 cb=00 cc=00 cd=00 ce=00 cf=00 d0=00 d1=00 d2=00 d3=00 d4=00
d5=00 d6
=00 d7=00 d8=00 d9=00 da=00 db=00 dc=00 dd=00 de=00 df=00 e0=00 e1=00
e2=00 e3=0
0 e4=00 e5=00 e6=00 e7=00 e8=00 e9=00 ea=00 eb=00 ec=00 ed=00 ee=00 ef=00
f0=00
f1=00 f2=00 f3=00 f4=00 f5=00 f6=00 f7=00 f8=00 f9=00 fa=00 fb=00 fc=00
fd=00 fe
=00 ff=00: emc6d100

Reply via email to