When I run ``sysctl hw.sensors'' on one of my machines, I get the
following output:
$ sysctl hw.sensors
hw.sensors.0=it0, Fan1, 5113 RPM
hw.sensors.3=it0, VCORE_A, 1.25 V DC
hw.sensors.4=it0, VCORE_B, 2.56 V DC
hw.sensors.5=it0, +3.3V, 2.38 V DC
hw.sensors.6=it0, +5V, 3.52 V DC
hw.sensors.7=it0, +12V, 10.69 V DC
hw.sensors.8=it0, Unused, -2.75 V DC
hw.sensors.9=it0, -12V, -11.40 V DC
hw.sensors.10=it0, +5VSB, 4.87 V DC
hw.sensors.11=it0, VBAT, 4.08 V DC
hw.sensors.12=it0, Temp 1, 33.00 degC
hw.sensors.13=it0, Temp 2, 35.00 degC
hw.sensors.14=it0, Temp 3, 36.00 degC
It would look like those values are *way* out of range, but the
machine's been otherwise running without problems. Is the power
supply really that crappy, or is it(4) not reporting correct values?
dmesg on this machine is:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Geode NX ("AuthenticAMD" 686-class, 256KB L2 cache) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 637038592 (622108K)
avail mem = 572289024 (558876K)
using 4256 buffers containing 31952896 bytes (31204K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1f) BIOS, date 10/18/05, BIOS32 rev. 0 @ 0xfb490,
SMBIOS rev. 2.2 @ 0xf0000 (33 entries)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdef4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 5 9 10 11
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00: aperture at 0xd8000000,
size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 741: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340015A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-52MAX, 52PP> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 5, SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 10, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11, version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: irq 9, version
1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 3
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: SiS EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 11, address
00:14:2a:b7:c9:17
rlphy0 at sis0 phy 9: RTL8201L 10/100 PHY, rev. 1
rl0 at pci0 dev 11 function 0 "Accton MPX 5030/5038" rev 0x10: irq 11, address
00:e0:29:58:9b:eb
rlphy1 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff4d netmask ff4d ttymask ffcf
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Qtronix Generic USB K/B, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Qtronix Generic USB K/B, rev 1.10/0.01, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=4, output=0, feature=0
uplcom0 at uhub1 port 2
uplcom0: Prolific Technology PL2303 Serial, rev 1.10/2.02, addr 3
ucom0 at uplcom0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
lpt0: out of paper
lpt0: stat=0x4 not zero
lpt0: stat=0x4 not zero
