Hi,
I installed 4.0 from the official CDs on my "new" notebook and now I have
two problems.. (dmesg below)
The NIC fxp0 times out with the GENERIC.MP kernel, but works fine with
the GENERIC kernel (using dhcp).
Plus the azalia soundcard has "No audio function groups", neither with the
MP nor with the GENERIC kernel. The speakers make, in fact, a cracking
sound during the OpenBSD boot process, as well as when I try to change the
volume with mixerctl. (mplayer also reports: "[AO SUN] Can't open audio
device /dev/audio, Invalid argument -> nosound." - the device works with
Windoze, though.)
I don't know what's wrong or where to start looking for clues, can someone
please point me into the right direction(s) / to the right man pages?
Thank you!
OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2
real mem = 1071673344 (1046556K)
avail mem = 969510912 (946788K)
using 4256 buffers containing 53686272 bytes (52428K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b6) BIOS, date 04/08/06, BIOS32 rev. 0 @
0xfd600, SMBIOS rev. 2.31 @ 0xdc010 (36 entries)
bios0: TOSHIBA Satellite A100
pcibios0 at bios0: rev 2.1 @ 0xfd600/0xa00
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1800 0xdc000/0x4000!
0xe0000/0x1800!
mainbus0: Intel MP Specification (Version 1.4) (INTEL Napa ERB )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility X1600" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 22 (irq 10)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x10ec (rev. 3.0), HDA version 1.0
azalia0: codec: 0x04x/0x11c1 (rev. 7.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
wpi0 at pci4 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev
0x02pci_intr_map: bus 4 dev 0 func 0 pin 1; line 10
pci_intr_map: no MP mapping found
: irq 10, address 00:13:02:28:93:f4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int
19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int
18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int
16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq 11)
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
cbb0 at pci5 dev 6 function 0 vendor "TI", unknown product 0x8039 rev
0x00pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "TI", unknown product 0x803a (class serial bus subclass Firewire,
rev 0x00) at pci5 dev 6 function 1 not configured
vendor "TI", unknown product 0x803b (class mass storage subclass
miscellaneous, rev 0x00) at pci5 dev 6 function 2 not configured
sdhc0 at pci5 dev 6 function 3 vendor "TI", unknown product 0x803c rev
0x00: apic 2 int 10 (irq 10)
sdmmc0 at sdhc0
fxp0 at pci5 dev 8 function 0 "Intel PRO/100 VM" rev 0x02, i82562: apic
2 int 10 (irq 10), address 00:a0:d1:3a:8c:53
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1032GSX>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16A, 1.63> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2
int 19 (irq 10)
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask 0 netmask 0 ttymask 0
ioapic0: pin 10 shares different IPL interrupts (40..50), degraded
performance
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
