> Marc Balmer wrote: > > * Willy Jacobs wrote: > >> OpenBSD 4.0 (amd64), but also the latest current release, > failed to > >> remap certain PCI interrupts (especially USB) on my > ASUS A8N SLI > >> Premium (NForce 4) motherboard. > >> > >> Is this problem caused by the NForce4 chip or APIC related? Hello,
I have the problem with amd64 see and I'm unable to boot because I get the following timeouts: ami0: timeout ccb 18 (http://marc.theaimsgroup.com/?l=openbsd-misc&m=116671932827017&w=2) Try booting with "-c" and "enable acpi". Here is my dmesg (with acpi enabled) because I can't boot without: OpenBSD 4.0-current (GENERIC.MP_acpi) #1: Mon Jan 1 14:22:26 CET 2007 [EMAIL PROTECTED]:/home/sources/src/sys/arch/amd64/compile/GENERIC.MP_acpi real mem = 3220303872 (3144828K) avail mem = 2757431296 (2692804K) using 22937 buffers containing 322236416 bytes (314684K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0690 (74 entries) bios0: stem manufacturer P5WDG2 WS PRO acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP APIC OEMB HPET MCFG acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat LAPIC: acpi_proc_id 1, apic_id 0, flags 0x1 cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, 2671.62 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 267MHz LAPIC: acpi_proc_id 2, apic_id 1, flags 0x1 cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, 2671.24 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG cpu1: 4MB 64b/line 16-way L2 cache LAPIC: acpi_proc_id 3, apic_id 82, flags 0x0 LAPIC: acpi_proc_id 4, apic_id 83, flags 0x0 IOAPIC: acpi_ioapic_id 2, address 0xfec00000, global_int_base 0x0 ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins IOAPIC: acpi_ioapic_id 3, address 0xfec10000, global_int_base 0x18 ioapic1 at mainbus0 apid 3 pa 0xfec10000, version 20, 24 pins OVERRIDE: bus 0, source 0, global_int 2, flags 0 OVERRIDE: bus 0, source 9, global_int 9, flags d OVERRIDE: bus 0, source 0, global_int 2, flags 0 OVERRIDE: bus 0, source 9, global_int 9, flags d acpi device at acpi0 from table OEMB not configured acpihpet0 at acpi0 table HPET: 14318179 Hz acpi device at acpi0 from table MCFG not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (P0P1) acpiprt2 at acpi0: bus 0 (P0P2) acpiprt3 at acpi0: bus 1 (P0P3) acpiprt4 at acpi0: bus 2 (P0P8) acpiprt5 at acpi0: bus 0 (P0P9) acpiprt6 at acpi0: bus 3 (P0P4) acpiprt7 at acpi0: bus 4 (PXHA) acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c rev 0xc0 ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev 0xc0 pci1 at ppb0 bus 6 vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int 19 (irq 11) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: 0x04x/0x11d4 (rev. 2.0), HDA version 1.0 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 3 ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 4 ppb3 at pci3 dev 2 function 0 "Intel IOP331 PCIX-PCIX" rev 0x0a pci4 at ppb3 bus 5 ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev 0x0a: apic 3 int 4 (irq 10) ami0: LSI 3008, 32b, FW 814D, BIOS vH431, 128MB RAM ami0: 1 channels, 0 FC loops, 3 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed sd0: 100000MB, 100000 cyl, 64 head, 32 sec, 512 bytes/sec, 204800000 sec total sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed sd1: 49998MB, 49998 cyl, 64 head, 32 sec, 512 bytes/sec, 102395904 sec total sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed sd2: 629606MB, 629606 cyl, 64 head, 32 sec, 512 bytes/sec, 1289433088 sec total scsibus1 at ami0: 16 targets ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci5 at ppb4 bus 2 mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Marvell Yukon-2 EC rev. A3 (0x2): apic 2 int 16 (irq 10) msk0 at mskc0 port A, address 00:18:f3:29:a2:53 eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 5) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 17 (irq 7) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 (irq 3) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 19 (irq 11) usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 5) usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci6 at ppb5 bus 1 pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4571A, 1-01> SCSI0 5/cdrom removable atapiscsi1 at pciide0 channel 0 drive 1 scsibus3 at atapiscsi1: 2 targets cd1 at scsibus3 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 23 (irq 10) for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 23 (irq 0) iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xc1) fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/0 uhidev1: 1 report ids uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0 uhidev2 at uhub1 port 2 configuration 1 interface 0 uhidev2: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1 ums0 at uhidev2: 5 buttons and Z dir. wsmouse0 at ums0 mux 0 dkcsum: sd0 matches BIOS drive 0x80 dkcsum: sd1 matches BIOS drive 0x81 dkcsum: sd2 matches BIOS drive 0x82 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
