hi misc@,
having OpenBSD 4.0 installed on my ThinkPad A22p (dmesg below) and
wearing the appropriate oBSD shirt i'd like to ask whether it's possible
to get max speed from this notebook without having the battery built in.
i booted without it as i don't need it; i use this machine as my energy
saving workstation for lightweighted tasks (email, browsing the web, etc.).
however, running connected to the power supply and without battery i get
this:
# apm
Battery state: unknown, 0% remaining, 0 minutes life estimate
A/C adapter state: connected
Performance adjustment mode: manual (698 MHz)
with the battery built in, i get 1 GHz. trying to set the speed manually
(apm -C or -H) is 'ignored' without error message -- it keeps running
on ~700MHz.
any ideas?
thanks & wbr,
timo schoeler
---
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 698 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R,SSE
real mem = 536375296 (523804K)
avail mem = 481329152 (470048K)
using 4256 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(22) BIOS, date 05/20/04, BIOS32 rev. 0 @
0xfd820, SMB
IOS rev. 2.3 @ 0xe0010 (47 entries)
bios0: IBM 2629UTG
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1800 0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility M3" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
address 00
:03:47:8b:b4:4f
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
rev 0x01:
irq 11
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wi
red to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-232>
wd0: 16-sector PIO, LBA, 30520MB, 62506080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4240N, 0214> SCSI0
5/cdrom r
emovable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask efed netmask efed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
clcs0: firmware loaded
audio0 at clcs0
