list,
when any configure script is checking for standard header files
(stdlib.h, memory.h) it hangs for a few seconds on each file, as if it
is taking this long to actually find each file on the disk. which i
guess is actually happening. making the script take about almost five
minutes to complete.
any ideas why this could be happening?
below is dmesg...
cheers
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 534 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem = 158887936 (155164K)
avail mem = 137269248 (134052K)
using 1965 buffers containing 8048640 bytes (7860K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(30) BIOS, date 03/18/02, BIOS32 rev. 0 @
0xfb370, SMBIOS rev. 2.2 @ 0xf0800 (43 entries)
bios0: VIA Technologies, Inc. VT8601
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdce4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc70/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8231 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x9800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8601 PCI" rev 0x05
ppb0 at pci0 dev 1 function 0 "VIA VT82C601 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade i1" rev 0x6a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 17 function 0 "VIA VT8231 ISA" rev 0x10
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 1: <Maxtor 6B160P0>
wd0: 16-sector PIO, LBA48, 156334MB, 320173056 sectors
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1e: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1e: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 17 function 4 "VIA VT8231 PMG" rev 0x10
auvia0 at pci0 dev 17 function 5 "VIA VT82C686 AC97" rev 0x40: irq 12
auvia0: codec reset timed out
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
ac97: codec id not read
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
auvia0: codec busy
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x51: irq 10, address
00:40:63:c1:1d:13
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 5: OUI
0x004063, model 0x0032
rl0 at pci0 dev 20 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:e0:4c:39:05:0f
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask e36d netmask ef6d ttymask efef
pctr: user-level cycle counter enabled
ugen0 at uhub0 port 1
ugen0: THOMSON Speed Touch 330, rev 1.10/4.00, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
