On Mon, Jan 15, 2007 at 07:57:31PM -0500, Michel Hubert wrote:
> >Hi,
> >
> >trying to install or upgrade OpenBSD 4.0 release does not seem to work
> >on Fujitsu Siemens Primergy P200 machines with an
> >Adaptec 2100S RAID controller.
> >
> >While booting up, the kernel hangs at:
> >--- screen copy ---
> >usb0 at ohci0: USB revision 1.0
> >uhub0 at usb0
> >uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> >uhub0: 4 ports with 4 removable, self powered
> >isa0 at pcib0
> >isadma0 at isa0
> >pckbc0 at isa0 port 0x60/5
> >pckbd0 at pckbc0 (kbd slot)
> >pckbc0: using irq 1 for kbd slot
> >wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >npx0 at isa0 port 0xf0/16: using exception 16
> >pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifi
> >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> >biomask f7c5 netmask ffe5 ttymask ffe7
> >rd0: fixed, 3800 blocks
> >iop0: configuring...
> >ioprbs0 at iop0 tid 518: <ADAPTEC, RAID-1, FS24> direct access, fixed
> >scsibus 2 at ioprb0: 1 targets
> >sd0 at scsibus2 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct
> >fixed
> >sd0: 17300MB, 17300 cyl, 64 head, 32 sec, 512 bytes/sec, 35430400 sec
> >total
> >iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7899, 00000001>
> >scsibus3 at iopsp0: 16 targets
>
> >I already tried out several combinations of BIOS and Adaptec RAID
> >controller flash versions with no luck for OpenBSD 4.0.
>
> Get stuck on the same place on IBM x335 using Adaptec 2100S RAID
> controller when installing 4.0.
>
> Worked well on OpenBSD 3.7
>
> Is that controler still supported?
Not as a RAID controller, no. See Google, 'adaptec "first against the
wall"', or just i386.html. However, that's no different from the
situation under 3.7.
It should work as a SCSI controller, though.
Joachim
