Use the even newer OpenBSD snapshot. Last night we uploaded some ACPI
fixes that might fix your problem. I just sent a note to misc@
explaining the process.
On Thu, Jan 25, 2007 at 04:12:36PM +0200, [EMAIL PROTECTED] wrote:
> Hi
> If i boot with bsd, than all works fine, but when I boot with bsd.mp i
> get error un the screan, that one error repeats all time.
> ichiic0: exec op 1, addr 0x2e, cmdlen 1, len1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<intr,inuse>
>
> I understand that this ichiic is Intel ICH SMBus controller.
> The Ethernet adapter (PCI) dont work (I can ping localhost, but i can't
> ping anything in network).
> The Two built in Intel ethernet ports dot work too ! (With bsd kernel
> works great !).
>
> When I add second RAM modul and try to compilling e.g. some port(with
> bsd kernel) i get:
> uvm_fault(0xd0757440, 0xd2000000, 0 3) -> e
> kernel: page fault trap, code=0
> Stopped at uvm_pagealloc_strat+0x155: movl %eax,0x4(%ecx)
> ddb>
>
> Is there any way to use both cores on CPU, and both RAM moduls ?
> Under FreeBSD 6.2 all works fine.
>
> My system: Intel S3000AH (Version LX) motherboard. Intel server chipset
> 3000 (I think, that the SATA controller is a ICH7R (82801GB /82801GR),
> but I dont now exatly, and i cant find any information in intel.com )
> CPU Intel dualcore pentium D 3,4GHz/800/2x2MB Socket LGA775,
> HDD 2xSamsung Sata2 NCQ
> RAM: 2 x 1GB PC5300 DDRII/ECC T667EB1GS MALAB I have updated BIOS, but
> that not helps.
> I use OpenBSD last snapshot.
>
>
> Here is my dmesg with bsd and bsd.mp kernels
>
>
> OpenBSD 4.0-current (GENERIC) #1350: Fri Jan 19 16:42:39 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> cpu0: Intel(R) Pentium(R) D CPU 3.40GHz ("GenuineIntel" 686-class) 3.41 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
> real mem = 1070452736 (1045364K)
> avail mem = 968257536 (945564K)
> using 4256 buffers containing 53735424 bytes (52476K) of memory
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @
> 0x3fe0e000 (42 entries)
> bios0: Intel Corporation S3000AHLX
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0x9000
> acpi at mainbus0 not configured
> cpu0 at mainbus0
> cpu0: Enhanced SpeedStep disabled by BIOS
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci4 at ppb3 bus 4
> em0 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq
> 9, address 00:15:17:13:ae:31
> "Intel 82573E AMT" rev 0x03 at pci4 dev 0 function 3 not configured
> "Intel 82573E KCS (Active Management)" rev 0x03 at pci4 dev 0 function 4
> not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci5 at ppb4 bus 5
> em1 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq
> 11, address 00:0e:0c:c6:70:ed
> vga1 at pci5 dev 4 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em2 at pci5 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
> 9, address 00:15:17:13:ae:32
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV4002H>
> wd0: 16-sector PIO, LBA, 38204MB, 78242976 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0
> 5/cdrom removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 10 for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
> iic0 at ichiic0
> adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask eded netmask efed ttymask ffef
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
>
> OpenBSD 4.0-current (GENERIC.MP) #1144: Fri Jan 19 16:58:21 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> cpu0: Intel(R) Pentium(R) D CPU 3.40GHz ("GenuineIntel" 686-class) 3.41 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
> real mem = 1070452736 (1045364K)
> avail mem = 968196096 (945504K)
> using 4256 buffers containing 53735424 bytes (52476K) of memory
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @
> 0x3fe0e000 (42 entries)
> bios0: Intel Corporation S3000AHLX
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0x9000
> acpi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199 MHz
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type PCI
> mainbus0: bus 6 is type ISA
> ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 5
> ioapic1 at mainbus0: apid 6 pa 0xfec10000, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci4 at ppb3 bus 4
> em0 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev
> 0x03pci_intr_map: bus 4 dev 0 func 0 pin 1; line 9
> pci_intr_map: no MP mapping found
> : irq 9, address 00:15:17:13:ae:31
> "Intel 82573E AMT" rev 0x03 at pci4 dev 0 function 3 not configured
> "Intel 82573E KCS (Active Management)" rev 0x03 at pci4 dev 0 function 4
> not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 5 int
> 16 (irq 11)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 5 int
> 17 (irq 10)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 5 int
> 18 (irq 11)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 5 int
> 19 (irq 11)
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 5 int
> 16 (irq 11)
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci5 at ppb4 bus 5
> em1 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev
> 0x05pci_intr_map: bus 5 dev 0 func 0 pin 1; line 11
> pci_intr_map: no MP mapping found
> : irq 11, address 00:0e:0c:c6:70:ed
> vga1 at pci5 dev 4 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em2 at pci5 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic
> 5 int 9 (irq 9), address 00:15:17:13:ae:32
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV4002H>
> wd0: 16-sector PIO, LBA, 38204MB, 78242976 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0
> 5/cdrom removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 5 int 17 (irq 10) for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 5
> int 17 (irq 10)
> iic0 at ichiic0
> adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> em0: watchdog timeout -- resetting
> em0: watchdog timeout -- resetting
> em0: watchdog timeout -- resetting
> em0: watchdog timeout -- resetting
> em0: watchdog timeout -- resetting
> em0: watchdog timeout -- resetting
