We have identified this and a fix should follow soonish.
On Fri, Jan 26, 2007 at 10:31:03PM +0200, Matiss Miglans wrote:
> I have the same problem with this snapshot !
>
> When I try to enable ACPI, i get crash...
> I use snapshots with date 24. Jan. with this cksums
> 1015849754 6124766 bsd
> 679103619 6173847 bsd.mp
> 2642142771 4992501 bsd.rd
> 1758654083 5107712 cd40.iso
>
> What else information i can to give ?!
> From which ftp comes new snapshots first ? From ftp.openbsd.org ?
>
>
> OpenBSD 4.0-current (generic) #1352: thu Jan 25 19:44:33 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/generic
> rtc bios diagnostic error f<fixed_disk, invalid_time>
> cpu0: Intel(r) Dcpu 3.40GHz ("GenuIntel" 686-class) 3.41GHz
> cpu0
> fpu,v86,de,pse,,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cnov,pat,pse36,cf
> lu,sh,ds,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,sbf,sse3,mwait,ds-cpl,est,cnxt-id,cx16
> real mem = 1070432256 (1045344k)
> avail mem = 968232960 (945540k)
> using 4256 buffers containing 53735424 bytes (52476k) of memory
> user kernel config
> ukc> enable acpi
> 385 acpi0 enabled
> ukc> quit
> Continuing...
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ bios, date 07/11/06, smbios rev.
> [EMAIL PROTECTED]( 42
> entries)
> bios0: Intel Corporation S3000AHLX
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0x9000
> acpi at mainbus0: REV 2panic: malloc allocations too large
> stopped at debugger+0x4: leave
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> ddb>
>
>
> ddb>trace
> Debuger(1.2.7.2.1ffffffb) at debugger+0x4
> panic (d067b7bf,0,d08b2c78,0,0) at panic+0x63
> malloc(f000eefb,2,1,d0469dd5) at malloc+0x7a
> acpi_load_table(0,0,f000eef3,d1a23e3c,0) at acpi_load_table+0x25
> acpi_loadtables(d1a23e00,e8f81350,1,d08b2de0) at acpi_loadtables+0x161
> acpi_attach(d1a22fc0,d1a23e00,0,0) at acpi_attach+0xea
> config_attach(0,d0731c6c,0,d0776ee0) at config_attach+0xef
> config_root_found(d069c124,0,d08b2f38,d045ff63) at config_rootfound+0x27
> cpu_configure(0,1,3,0,0) at cpu_configure+0x2e
> main(0,0,0,0,0) at main+0x34e
> ddb>
>
> ddb>ps
> PID PPID PGRP UID S FLAGS WAIT COMMAND
> * 0 -1 0 0 7 0x80200 SWAPPER
> ddb>
>
>
>
>
>
>
> On Thu, Jan 25, 2007 at 04:12:36PM +0200, [EMAIL PROTECTED] wrote:
>
> >> Hi
> >> If i boot with bsd, than all works fine, but when I boot with bsd.mp i
> >> get error un the screan, that one error repeats all time.
> >> ichiic0: exec op 1, addr 0x2e, cmdlen 1, len1, flags 0x00: timeout,
> >> status 0x0
> >> ichiic0: abort failed, status 0x42<intr,inuse>
> >>
> >> I understand that this ichiic is Intel ICH SMBus controller.
> >> The Ethernet adapter (PCI) dont work (I can ping localhost, but i can't
> >> ping anything in network).
> >> The Two built in Intel ethernet ports dot work too ! (With bsd kernel
> >> works great !).
> >>
> >> When I add second RAM modul and try to compilling e.g. some port(with
> >> bsd kernel) i get:
> >> uvm_fault(0xd0757440, 0xd2000000, 0 3) -> e
> >> kernel: page fault trap, code=0
> >> Stopped at uvm_pagealloc_strat+0x155: movl %eax,0x4(%ecx)
> >> ddb>
> >>
> >> Is there any way to use both cores on CPU, and both RAM moduls ?
> >> Under FreeBSD 6.2 all works fine.
> >>
> >> My system: Intel S3000AH (Version LX) motherboard. Intel server chipset
> >> 3000 (I think, that the SATA controller is a ICH7R (82801GB /82801GR),
> >> but I dont now exatly, and i cant find any information in intel.com )
> >> CPU Intel dualcore pentium D 3,4GHz/800/2x2MB Socket LGA775,
> >> HDD 2xSamsung Sata2 NCQ
> >> RAM: 2 x 1GB PC5300 DDRII/ECC T667EB1GS MALAB I have updated BIOS, but
> >> that not helps.
> >> I use OpenBSD last snapshot.
>
>
>
> There is my dmesg with bsd.mp
>
> OpenBSD 4.0-current (GENERIC.MP) #1146: Thu Jan 25 20:00:21 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> cpu0: Intel(R) Pentium(R) D CPU 3.40GHz ("GenuineIntel" 686-class) 3.41 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
> real mem = 1070432256 (1045344K)
> avail mem = 968175616 (945484K)
> using 4256 buffers containing 53735424 bytes (52476K) of memory
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @
> 0x3fe0e000 (42 entries)
> bios0: Intel Corporation S3000AHLX
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0x9000
> acpi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199 MHz
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type PCI
> mainbus0: bus 6 is type ISA
> ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 5
> ioapic1 at mainbus0: apid 6 pa 0xfec10000, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci4 at ppb3 bus 4
> em0 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev
> 0x03pci_intr_map: bus 4 dev 0 func 0 pin 1; line 9
> pci_intr_map: no MP mapping found
> : irq 9, address 00:15:17:13:ae:31
> "Intel 82573E AMT" rev 0x03 at pci4 dev 0 function 3 not configured
> "Intel 82573E KCS (Active Management)" rev 0x03 at pci4 dev 0 function 4
> not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 5 int
> 16 (irq 11)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 5 int
> 17 (irq 10)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 5 int
> 18 (irq 11)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 5 int
> 19 (irq 11)
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 5 int
> 16 (irq 11)
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci5 at ppb4 bus 5
> em1 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev
> 0x05pci_intr_map: bus 5 dev 0 func 0 pin 1; line 11
> pci_intr_map: no MP mapping found
> : irq 11, address 00:0e:0c:c6:70:ed
> vga1 at pci5 dev 4 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em2 at pci5 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic
> 5 int 9 (irq 9), address 00:15:17:13:ae:32
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV4002H>
> wd0: 16-sector PIO, LBA, 38204MB, 78242976 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0
> 5/cdrom removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 5 int 17 (irq 10) for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 5
> int 17 (irq 10)
> iic0 at ichiic0
> adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout,
> status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
>
>
> And there is my dmesg with bsd kernel !
>
> OpenBSD 4.0-current (GENERIC) #1352: Thu Jan 25 19:44:33 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> cpu0: Intel(R) Pentium(R) D CPU 3.40GHz ("GenuineIntel" 686-class) 3.41 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
> real mem = 1070432256 (1045344K)
> avail mem = 968232960 (945540K)
> using 4256 buffers containing 53735424 bytes (52476K) of memory
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @
> 0x3fe0e000 (42 entries)
> bios0: Intel Corporation S3000AHLX
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0x9000
> acpi at mainbus0 not configured
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci4 at ppb3 bus 4
> em0 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq
> 9, address 00:15:17:13:ae:31
> "Intel 82573E AMT" rev 0x03 at pci4 dev 0 function 3 not configured
> "Intel 82573E KCS (Active Management)" rev 0x03 at pci4 dev 0 function 4
> not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci5 at ppb4 bus 5
> em1 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq
> 11, address 00:0e:0c:c6:70:ed
> vga1 at pci5 dev 4 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em2 at pci5 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
> 9, address 00:15:17:13:ae:32
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV4002H>
> wd0: 16-sector PIO, LBA, 38204MB, 78242976 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0
> 5/cdrom removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 10 for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
> iic0 at ichiic0
> adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask eded netmask efed ttymask ffef
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
>
>
>
>
>
> Marco Peereboom wrote:
> >Good ACPI news for everyone! Over the last few days a bunch of people
> >have
> >been involved in fixing several issues that were holding back potential
> >deployment of the shiny new ACPI based interrupt routing magic.
> >
> >We need far and wide testing of all this code on all amd64 and i386
> >platforms
> >(including apple junk). This test should be run with both GENERIC and
> >GENERIC.MP.
> >
> >To test this code boot the kernel into UKC by using the -c switch at the
> >boot
> >prompt and enable acpi. Example:
> >boot> b /bsd.mp -c
> >... dmesg stuff ...
> >User Kernel Config
> >UKC> enable acpi
> >254 acpi0 enabled
> >UKC> quit
> >Continuing...
> >
> >If you see any issues please mail jordan@ kettenis@ & marco@ with both
> >GENERIC
> >and GENERIC.MP dmesg with ACPI enabled AND disabled (that's a total of 4
> >dmesg!). We don't need successful dmesg at this time so please only mail
> >failed ones. Please send all dmesg in cleartext; mime and attachments
> >make our
> >collective heads hurt.
> >
> >Please take this test very seriously!
> >
> >Thanks!
> >/marco
> >
> >
> >Here is a full dmesg from my testbed:
> >
> >>>OpenBSD/amd64 BOOT 2.12
> >>>
> >boot> b /bsd.mp.ioapic -c
> >booting hd0a:/bsd.mp.ioapic: 4245572+919918+694528+0+438224
> >[80+361560+225151]=0xa926f8
> >entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 1a00a304]*[ using
> >587560 bytes of bsd ELF symbol table ]
> >Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights reserved.
> > Copyright (c) 1995-2007 OpenBSD. All rights reserved.
> > http://www.OpenBSD.org
> >
> >OpenBSD 4.0-current (GENERIC.MP) #6: Wed Jan 24 14:32:17 CST 2007
> > [EMAIL PROTECTED]:/usr/src/sys2/arch/amd64/compile/GENERIC.MP
> >real mem = 3756621824 (3668576K)
> >avail mem = 3222749184 (3147216K)
> >using 22937 buffers containing 375869440 bytes (367060K) of memory
> >User Kernel Config
> >UKC> enable acpi
> >254 acpi0 enabled
> >UKC> quit
> >Continuing...
> >mainbus0 (root)
> >bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdffbc000 (71 entries)
> >bios0: Dell Inc. PowerEdge 6950
> >acpi0 at mainbus0: rev 2-- debug --
> > 0xffff8000060ca320 cnt:00 string: _PIC
> >-- debug --
> > 0xffff8000060db120 cnt:00 integer: 1
> >
> >acpi0: tables DSDT FACP APIC SPCR HPET MCFG SRAT SSDT
> >acpitimer at acpi0 not configured
> >acpi device at acpi0 from table DSDT not configured
> >acpi device at acpi0 from table FACP not configured
> >acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
> >LAPIC: acpi_proc_id 1, apic_id 0, flags 0x1
> >cpu0 at mainbus0: apid 0 (boot processor)
> >cpu0: Dual-Core AMD Opteron(tm) Processor 8220, 2000.37 MHz
> >cpu0:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu0: apic clock running at 200MHz
> >LAPIC: acpi_proc_id 2, apic_id 2, flags 0x1
> >cpu1 at mainbus0: apid 2 (application processor)
> >cpu1: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu1:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >LAPIC: acpi_proc_id 3, apic_id 4, flags 0x1
> >cpu2 at mainbus0: apid 4 (application processor)
> >cpu2: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu2:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >LAPIC: acpi_proc_id 4, apic_id 6, flags 0x1
> >cpu3 at mainbus0: apid 6 (application processor)
> >cpu3: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu3:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >LAPIC: acpi_proc_id 5, apic_id 1, flags 0x1
> >cpu4 at mainbus0: apid 1 (application processor)
> >cpu4: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu4:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu4: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu4: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu4: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >LAPIC: acpi_proc_id 6, apic_id 3, flags 0x1
> >cpu5 at mainbus0: apid 3 (application processor)
> >cpu5: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu5:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu5: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu5: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu5: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >LAPIC: acpi_proc_id 7, apic_id 5, flags 0x1
> >cpu6 at mainbus0: apid 5 (application processor)
> >cpu6: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu6:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu6: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu6: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu6: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >LAPIC: acpi_proc_id 8, apic_id 7, flags 0x1
> >cpu7 at mainbus0: apid 7 (application processor)
> >cpu7: Dual-Core AMD Opteron(tm) Processor 8220, 2000.07 MHz
> >cpu7:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> >cpu7: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> >64b/line 16-way L2 cache
> >cpu7: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >cpu7: DTLB 32 4KB entries fully associative, 8 4MB entries fully
> >associative
> >IOAPIC: acpi_ioapic_id 8, address 0xfec00000, global_int_base 0x0
> >ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 11, 16 pins
> >ioapic0: misconfigured as apic 0, remapped to apid 8
> >IOAPIC: acpi_ioapic_id 9, address 0xfec01000, global_int_base 0x20
> >ioapic1 at mainbus0 apid 9 pa 0xfec01000, version 11, 16 pins
> >ioapic1: misconfigured as apic 0, remapped to apid 9
> >IOAPIC: acpi_ioapic_id a, address 0xfec02000, global_int_base 0x40
> >ioapic2 at mainbus0 apid 10 pa 0xfec02000, version 11, 16 pins
> >ioapic2: misconfigured as apic 0, remapped to apid 10
> >apic_type 4
> >apic_type 4
> >apic_type 4
> >apic_type 4
> >apic_type 4
> >apic_type 4
> >apic_type 4
> >apic_type 4
> >OVERRIDE: bus 0, source 0, global_int 2, flags 0
> >acpi device at acpi0 from table SPCR not configured
> >acpi device at acpi0 from table HPET not configured
> >acpi device at acpi0 from table MCFG not configured
> >acpi device at acpi0 from table SRAT not configured
> >acpi device at acpi0 from table SSDT not configured
> >-- debug --
> > 0xffff8000060e4520 cnt:00 string: Method _INI
> >acpiprt0 at acpi0: bus 0 (PCI0)
> >acpiprt1 at acpi0: bus 8 (PXB_)
> >acpiprt2 at acpi0: bus 9 (PPBX)
> >acpiprt3 at acpi0: bus 10 (EXB0)
> >acpiprt4 at acpi0: bus 4 (EXB1)
> >acpiprt5 at acpi0: bus 6 (EXB2)
> >acpiprt6 at acpi0: bus 1 (EXB3)
> >acpiprt7 at acpi0: bus 11 (EXB4)
> >acpiprt8 at acpi0: bus 32 (PCI1)
> >acpiprt9 at acpi0: bus 33 (EXB0)
> >acpiprt10 at acpi0: bus 34 (EXB1)
> >acpiprt11 at acpi0: bus 35 (EXB2)
> >acpiprt12 at acpi0: bus 36 (EXB3)
> >acpiprt13 at acpi0: bus 37 (EXB4)
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >acpicpu at acpi0 not configured
> >ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
> >pci0 at mainbus0 bus 0: configuration mode 1
> >ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
> >pci1 at ppb0 bus 8
> >ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
> >pci2 at ppb1 bus 9
> >piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
> >iic0 at piixpm0: disabled to avoid ipmi0 interactions
> >pciide0 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
> >atapiscsi0 at pciide0 channel 0 drive 0
> >scsibus0 at atapiscsi0: 2 targets
> >cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
> >5/cdrom removable
> >cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
> >pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
> >ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 8
> >int 11 (irq 11), version 1.0, legacy support
> >usb0 at ohci0: USB revision 1.0
> >uhub0 at usb0
> >uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> >uhub0: 2 ports with 2 removable, self powered
> >ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 8
> >int 11 (irq 11), version 1.0, legacy support
> >usb1 at ohci1: USB revision 1.0
> >uhub1 at usb1
> >uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> >uhub1: 2 ports with 2 removable, self powered
> >ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 8
> >int 11 (irq 11)
> >usb2 at ehci0: USB revision 2.0
> >uhub2 at usb2
> >uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
> >uhub2: 4 ports with 4 removable, self powered
> >vga1 at pci0 dev 4 function 0 "ATI ES1000" rev 0x02
> >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >ppb2 at pci0 dev 7 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci3 at ppb2 bus 10
> >ppb3 at pci0 dev 8 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci4 at ppb3 bus 4
> >ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> >pci5 at ppb4 bus 5
> >bnx0 at pci5 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 9 int 1
> >(irq 5)
> >ppb5 at pci0 dev 9 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci6 at ppb5 bus 6
> >ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> >pci7 at ppb6 bus 7
> >bnx1 at pci7 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 9 int 5
> >(irq 10)
> >ppb7 at pci0 dev 10 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci8 at ppb7 bus 1
> >ppb8 at pci8 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
> >pci9 at ppb8 bus 2
> >mfi0 at pci9 dev 14 function 0 "Dell PERC 5" rev 0x00, Dell PERC 5/i:
> >apic 9 int 3 (irq 6)
> >mfi0: logical drives 1, version 5.0.1-0030, 256MB RAM
> >scsibus1 at mfi0: 1 targets
> >sd0 at scsibus1 targ 0 lun 0: <DELL, PERC 5/i Adapter, 1.00> SCSI3
> >0/direct fixed
> >sd0: 278784MB, 278784 cyl, 64 head, 32 sec, 512 bytes/sec, 570949632 sec
> >total
> >ppb9 at pci8 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
> >pci10 at ppb9 bus 3
> >ppb10 at pci0 dev 11 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci11 at ppb10 bus 11
> >pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> >pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> >pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> >pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> >pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
> >pci12 at pchb4 bus 32
> >ppb11 at pci12 dev 7 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci13 at ppb11 bus 33
> >ppb12 at pci12 dev 8 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci14 at ppb12 bus 34
> >ppb13 at pci12 dev 9 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci15 at ppb13 bus 35
> >ppb14 at pci12 dev 10 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci16 at ppb14 bus 36
> >ppb15 at pci12 dev 11 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
> >pci17 at ppb15 bus 37
> >pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
> >pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> >pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> >pchb8 at pci0 dev 26 function 0 "AMD AMD64 HyperTransport" rev 0x00
> >pchb9 at pci0 dev 26 function 1 "AMD AMD64 Address Map" rev 0x00
> >pchb10 at pci0 dev 26 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> >pchb11 at pci0 dev 26 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> >pchb12 at pci0 dev 27 function 0 "AMD AMD64 HyperTransport" rev 0x00
> >pchb13 at pci0 dev 27 function 1 "AMD AMD64 Address Map" rev 0x00
> >pchb14 at pci0 dev 27 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> >pchb15 at pci0 dev 27 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> >isa0 at pcib0
> >isadma0 at isa0
> >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >com0: console
> >com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> >pckbc0 at isa0 port 0x60/5
> >pckbd0 at pckbc0 (kbd slot)
> >pckbc0: using irq 1 for kbd slot
> >wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >pcppi0 at isa0 port 0x61
> >midi0 at pcppi0: <PC speaker>
> >spkr0 at pcppi0
> >uhub3 at uhub2 port 3
> >uhub3: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
> >uhub3: 4 ports with 4 removable, self powered, multiple transaction
> >translators
> >uhidev0 at uhub3 port 2 configuration 1 interface 0
> >uhidev0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 3, iclass 3/1
> >ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> >wskbd1 at ukbd0 mux 1
> >wskbd1: connecting to wsdisplay0
> >uhidev1 at uhub3 port 2 configuration 1 interface 1
> >uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 3, iclass 3/1
> >uhidev1: 3 report ids
> >ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
> >wsmouse0 at ums0 mux 0
> >uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
> >uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
> >uhub4 at uhub2 port 4
> >uhub4: Dell product 0xa001, rev 2.00/0.00, addr 4
> >uhub4: 2 ports with 2 removable, self powered, multiple transaction
> >translators
> >uhub5 at uhub4 port 1
> >uhub5: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 5
> >uhub5: 4 ports with 4 removable, self powered, multiple transaction
> >translators
> >dkcsum: sd0 matches BIOS drive 0x80
> >root on sd0a
> >rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> >bnx1: address 00:13:72:2d:98:82
> >brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> >bnx0: address 00:13:72:2d:98:80
> >brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
