On Sunday 28 January 2007 14:19, Vijay Sankar wrote:
> Good day,
>
> What do I have to do to get info about a raid array on a HP DL380 G4 with
> bioctl? Is this supported?
>
> # bioctl -v -h ciss0
> bioctl: Can't locate ciss0 device via /dev/bio
That's interesting, I can replicate this problem on my HP DL365 machines and
current, but not on HP DL385 and current.
dmesg, 365 then 385...
bioctl -v ciss0
bioctl: Can't locate ciss0 device via /dev/bio
OpenBSD 4.0-current (GENERIC.MP) #1: Mon Nov 27 17:16:55 CET 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1073082368 (1047932K)
avail mem = 907214848 (885952K)
using 22937 buffers containing 107515904 bytes (104996K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xee000 (59 entries)
bios0: HP ProLiant DL365 G1
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2210, 1800.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2210, 1800.07 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type PCI
mpbios: bus 10 is type PCI
mpbios: bus 11 is type PCI
mpbios: bus 12 is type PCI
mpbios: bus 13 is type PCI
mpbios: bus 16 is type PCI
mpbios: bus 19 is type PCI
mpbios: bus 21 is type PCI
mpbios: bus 241 is type ISA
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 9 pa 0xfec01000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
vga1 at pci0 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci0 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci0 dev 4 function 2 not configured
uhci0 at pci0 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 9 int 10
(irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Hewlett-Packard IPMI" rev 0x00 at pci0 dev 4 function 6 not configured
ppb0 at pci0 dev 5 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
pci2 at ppb1 bus 2
piixpm0 at pci0 dev 6 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0: disabled to avoid ipmi0 interactions
pciide0 at pci0 dev 6 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, C.8D> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
pcib0 at pci0 dev 6 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 7 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 8 int
5 (irq 5), version 1.0, legacy support
usb1 at ohci0: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 7 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 8 int
5 (irq 5), version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
uhub2 at usb2
uhub2: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 7 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 8 int
5 (irq 5)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pci3 at pchb0 bus 8
ppb2 at pci3 dev 15 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci4 at ppb2 bus 19
ppb3 at pci3 dev 16 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci5 at ppb3 bus 16
ppb4 at pci3 dev 17 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci6 at ppb4 bus 9
ppb5 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci7 at ppb5 bus 10
bnx0 at pci7 dev 0 function 0 "Broadcom BCM5708" rev 0x11: apic 9 int 3 (irq
11)
ppb6 at pci3 dev 18 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci8 at ppb6 bus 11
ppb7 at pci8 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci9 at ppb7 bus 12
bnx1 at pci9 dev 0 function 0 "Broadcom BCM5708" rev 0x11: apic 9 int 12 (irq
11)
ppb8 at pci3 dev 19 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci10 at ppb8 bus 13
ppb9 at pci10 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb4
pci11 at ppb9 bus 14
ppb10 at pci11 dev 4 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci12 at ppb10 bus 15
ciss0 at pci11 dev 8 function 0 "Hewlett-Packard Smart Array" rev 0x00: apic 9
int 1 (irq 11)
ciss0: 1 LD, HW rev 0, FW 1.20/
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.20> SCSI0 0/direct fixed
sd0: 69973MB, 69973 cyl, 64 head, 32 sec, 512 bytes/sec, 143305920 sec total
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub2 port 1
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.07, addr 2
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse1 at ums0 mux 0
uhub5 at uhub0 port 2
uhub5: HP Virtual Hub, rev 1.10/0.01, addr 3
uhub5: 7 ports with 7 removable, self powered
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
bnx1: address 00:18:fe:34:99:c6
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5
bnx0: address 00:18:fe:34:c9:76
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5
bioctl -v ciss0
Volume Status Size Device
ciss0 0 Online 146807930880 sd0 RAID0
0 Online 146811543552 1:0.0 noencl <COMPAQ BD14689BB9 >
'DAA1P61027A80604'
OpenBSD 4.0-current (GENERIC) #815: Wed Jan 24 21:21:44 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147053568 (2096732K)
avail mem = 1834905600 (1791900K)
using 22937 buffers containing 214913024 bytes (209876K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (64 entries)
bios0: HP ProLiant DL385 G1
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP APIC SPCR SRAT
acpitimer at acpi0 not configured
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table SPCR not configured
acpi device at acpi0 from table SRAT not configured
acpiprt0 at acpi0: bus 1 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpiprt2 at acpi0: bus 3 (PCI2)
acpiprt3 at acpi0: bus 0 (CFG0)
acpiprt4 at acpi0: bus 5 (PCI3)
acpiprt5 at acpi0: bus 6 (PCI4)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 275, 2205.28 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 3 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 5, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 5, version 1.0,
legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
"Compaq iLO" rev 0x01 at pci1 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci1 dev 2 function 2 not configured
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "AMD 8111 LPC" rev 0x05
pciide0 at pci0 dev 4 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD-ROM TS-L162C, N203> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
amdpm0 at pci0 dev 4 function 3 "AMD 8111 Power" rev 0x05
ppb1 at pci0 dev 7 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
ciss0 at pci2 dev 4 function 0 "Compaq Smart Array 64xx" rev 0x01: irq 7
ciss0: 1 LD, HW rev 1, FW 2.58/2.58
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.58> SCSI0 0/direct fixed
sd0: 140006MB, 140006 cyl, 64 head, 32 sec, 512 bytes/sec, 286734240 sec total
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 7 function 1 not configured
ppb2 at pci0 dev 8 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
bge0 at pci3 dev 6 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 7, address 00:16:35:5a:7b:16
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 6 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 10, address 00:16:35:5a:7b:15
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 8 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pci4 at pchb0 bus 4
ppb3 at pci4 dev 9 function 0 "AMD 8131 PCIX" rev 0x12
pci5 at ppb3 bus 5
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 9 function 1 not configured
ppb4 at pci4 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci6 at ppb4 bus 6
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 10 function 1 not configured
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
