Hi Mark
On 2/3/07, Mark Kettenis <[EMAIL PROTECTED]> wrote:
Regarding the high interrupt load on the v210; try disconnecting the
CD-ROM/DVD-ROM.
Removing the CD drives silenced the interrupts, and the CPU load
dropped to 0%, thanks.
Can you try the attached diff? It has some debug printf's in there,
so please send me a dmesg.
After CVSupdating last night and applying your patch, the fiber NICs
worked for a few pings, but since they changed their status from
"active" to "no carrier".
Please find some debug output below.
By the way, the large Marvell chip on the SK-9S91 NIC is labelled "88E8021".
Thanks,
Rolf
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:4f:64:0c:52
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 10.7.91.218 netmask 0xffffff80 broadcast 10.7.91.255
inet6 fe80::214:4fff:fe64:c52%bge0 prefixlen 64 scopeid 0x1
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:4f:64:0c:53
media: Ethernet autoselect (1000baseT full-duplex)
status: active
bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:4f:64:0c:54
media: Ethernet autoselect (none)
status: no carrier
bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:4f:64:0c:55
media: Ethernet autoselect (none)
status: no carrier
msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5a:72:fc:59
media: Ethernet autoselect (none)
status: no carrier
inet6 fe80::200:5aff:fe72:fc59%msk0 prefixlen 64 scopeid 0x5
inet 10.20.0.218 netmask 0xffffff00 broadcast 10.20.0.255
pflog0: flags=0<> mtu 33192
enc0: flags=0<> mtu 1536
#
# ifconfig -m msk0
msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5a:72:fc:59
media: Ethernet autoselect (none)
status: no carrier
supported media:
media none
media 1000baseSX
media 1000baseSX mediaopt full-duplex
media autoselect
inet6 fe80::200:5aff:fe72:fc59%msk0 prefixlen 64 scopeid 0x5
inet 10.20.0.218 netmask 0xffffff00 broadcast 10.20.0.255
#
# dmesg
console is /[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.0-current (GENERIC) #0: Mon Feb 5 02:19:55 CET 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 969416704
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
mainbus0 (root): Sun Fire V210
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1336 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K
external (64 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: "Tomatillo", version 4, ign 7c0, bus B 0 to 0
schizo0: dvma map c0000000-dfffffff, iotdb 4d16000-4d96000
pci0 at schizo0
bge0 at pci0 dev 2 function 0 "Broadcom BCM5704C" rev 0x00, BCM5704 B0
(0x2100): ivec 0x7c8, address 00:14:4f:64:0c:52
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci0 dev 2 function 1 "Broadcom BCM5704C" rev 0x00, BCM5704 B0
(0x2100): ivec 0x7c9, address 00:14:4f:64:0c:53
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
schizo1 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 0
schizo1: dvma map c0000000-dfffffff, iotdb 547e000-54fe000
pci1 at schizo1
ebus0 at pci1 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"flashprom" at ebus0 addr 0-fffff, 290-290 not configured
rtc0 at ebus0 addr 70-71: m5819p
pcfiic0 at ebus0 addr 320-321 ipl 46
iic0 at pcfiic0
"SUNW,i2c-imax" at iic0 addr 0xb not configured
"SUNW,i2c-imax" at iic0 addr 0xc not configured
"at24c64" at iic0 addr 0x51 not configured
"at24c64" at iic0 addr 0x54 not configured
"at24c64" at iic0 addr 0x58 not configured
"at34c02" at iic0 addr 0x5b not configured
"at34c02" at iic0 addr 0x5c not configured
"at34c02" at iic0 addr 0x5d not configured
"at34c02" at iic0 addr 0x5e not configured
"ds1307" at iic0 addr 0x68 not configured
"at24c64" at iic0 addr 0x28 not configured
"pca9555" at iic0 addr 0x22 not configured
"pca9555" at iic0 addr 0x23 not configured
"pca9555" at iic0 addr 0x34 not configured
"pca9556" at iic0 addr 0x38 not configured
power0 at ebus0 addr 800-82f ipl 32: can't map register space
com0 at ebus0 addr 3f8-3ff ipl 44: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 44: ns16550a, 16 byte fifo
"rmc-comm" at ebus0 addr 3e8-3ef ipl 44 not configured
"Acer Labs M7101 Power" rev 0x00 at pci1 dev 6 function 0 not configured
ohci0 at pci1 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0x7a7, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pciide0 at pci1 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 0x798 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
schizo2 at mainbus0: "Tomatillo", version 4, ign 700, bus A 0 to 0
schizo2: dvma map c0000000-dfffffff, iotdb 5510000-5590000
pci2 at schizo2
siop0 at pci2 dev 2 function 0 "Symbios Logic 53c1010-66" rev 0x01:
ivec 0x729, using 8K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST373207LSUN72G, 045A> SCSI3
0/direct fixed
sd0: 70007MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sec, 143374738 sec total
siop1 at pci2 dev 2 function 1 "Symbios Logic 53c1010-66" rev 0x01:
ivec 0x728, using 8K of on-board RAM
scsibus1 at siop1: 16 targets
schizo3 at mainbus0: "Tomatillo", version 4, ign 740, bus B 0 to 0
schizo3: dvma map c0000000-dfffffff, iotdb 55be000-563e000
pci3 at schizo3
bge2 at pci3 dev 2 function 0 "Broadcom BCM5704C" rev 0x00, BCM5704 B0
(0x2100): ivec 0x75c, address 00:14:4f:64:0c:54
brgphy2 at bge2 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge3 at pci3 dev 2 function 1 "Broadcom BCM5704C" rev 0x00, BCM5704 B0
(0x2100): ivec 0x75d, address 00:14:4f:64:0c:55
brgphy3 at bge3 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
mskc0 at pci3 dev 1 function 0 "Schneider & Koch SK-9Sxx" rev 0x11pmdtype: L
, Yukon-2 XL rev. A1 (0x1): ivec 0x744
msk0 at mskc0 port A, address 00:00:5a:72:fc:59
eephy0 at msk0 phy 0: Marvell 88E1112 Gigabit PHY, rev. 1
0: 0x1140
1: 0x7949
2: 0x0141
3: 0x0c91
4: 0x05e1
5: 0x0000
6: 0x0004
7: 0x2001
8: 0x0000
9: 0x0000
10: 0x0000
11: 0x0000
12: 0x0000
13: 0x0000
14: 0x0000
15: 0x3000
16: 0x6060
17: 0x4000
18: 0x0000
19: 0x0000
20: 0x0000
21: 0x0000
22: 0x8000
23: 0x0000
24: 0x0000
25: 0x0000
26: 0x0040
27: 0x0000
28: 0x0000
29: 0x0000
30: 0x0000
31: 0x0000
16_2: 0x0288
0: 0x1140
1: 0x0149
2: 0x0141
3: 0x0c91
4: 0x0060
5: 0x0000
6: 0x0004
7: 0x2001
8: 0x0000
9: 0x0000
10: 0x0000
11: 0x0000
12: 0x0000
13: 0x0000
14: 0x0000
15: 0xc000
16: 0x0000
17: 0x0090
18: 0x0000
19: 0x0000
20: 0x0000
21: 0x0000
22: 0x8001
23: 0x0000
24: 0x0000
25: 0x0000
26: 0x8083
27: 0x0000
28: 0x0000
29: 0x0000
30: 0x0000
31: 0x0000
pcons at mainbus0 not configured
No counter-timer -- using %tick at 1336MHz as system clock.
root on sd0a
siop0: target 0 now using tagged DT 16 bit 80.0 MHz 62 REQ/ACK offset xfers
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
#
