I've installed poptop from ports and have configured it mostly correct.
I can authenticate and connect, but then I lose the ability to browse
the internet, and cannot ping the ip address that it shows I've been
assigned.
Can you see anything I'm missing?
pptpd.conf:
/etc/ppp/ppp.conf
bcrelay rl0
localip 192.168.0.234-244
remoteip 192.168.0.234-244
listen 24.18.121.37
pidfile /var/run/pptp.pid
/etc/ppp/ppp.conf:
loop:
set timeout 0
set log phase chat connect lcp ipcp command
set device localhost:pptp
set dial
set login
set mppe * stateful
# Server (local) IP address, Range for Clients, and Netmask
# Use the same IP addresses you specified in /etc/pppd.conf :
set ifaddr 192.168.0.1 192.168.0.234-192.168.0.244 255.255.255.0
set server /tmp/loop "" 0177
loop-in:
set timeout 0
set log phase lcp ipcp command
allow mode direct
pptp:
load loop
# Disable unsecured auth
disable pap
disable chap
enable mschapv2
disable deflate pred1
deny deflate pred1
disable ipv6
accept mppe
enable proxy
accept dns
# DNS Servers to assign client
# Use your own DNS server IP address :
set dns 192.168.0.1
