I'm having trouble connecting to my OpenBSD wireless router with my Nintendo DS handheld. Here is some general information about my setup.
uname -a: OpenBSD lordnikon.thehomerow.net 4.0 GENERIC#1107 i386 ifconfig ral0: ral0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:30:4f:4c:0c:9b media: IEEE802.11 autoselect hostap (autoselect mode 11b hostap) status: active ieee80211: nwid Mother2 chan 2 bssid 00:30:4f:4c:0c:9b nwkey <not displayed> 100dBm inet6 fe80::230:4fff:fe4c:c9b%ral0 prefixlen 64 scopeid 0x2 inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 The DS is giving me an "Error Code: 51300" message when it tries to test the connection. I've found some forums that mention this might be a problem with the DS not gracefully dropping to the 1-2 Mbps connection rate that it requires (for some odd reason). The available media options for ral0 to set 1 or 2 Mbps connection rates are DS1 and DS2. I've tried all combinations of these media options, no mode setting, and mode 11b. I tried 11b because there were also some mentions of the DS not dropping to an 11b connection if 11g is present too. I've also tried specifying different channels for the wireless card. I tried 1, 11, and 12 with no success. I was suggested to put the wireless card into "mixed" mode, but I'm not exactly sure if there's a way to specify this, or this is what no mode setting defaults to on a card that is capable of both 11b and 11g. If anyone has any ideas, I would really appreciate it. I've posted this problem on two different forums and still haven't been able to solve it. Thanks! -Brian Figured I'd attach my dmesg for good measure... OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Sempron(tm) Processor 2500+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3 real mem = 468938752 (457948K) avail mem = 419680256 (409844K) using 4256 buffers containing 23547904 bytes (22996K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 09/12/05, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xf0530 (54 entries) bios0: ASUSTeK Computer Inc. K8V-MX apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf58b0/208 (11 entries) pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0x8200 0xc8800/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA K8M800 Host" rev 0x00 pchb1 at pci0 dev 0 function 1 "VIA K8M800 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA K8M800 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA K8M800 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA K8M800 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA K8M800 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01: aperture at 0xf4000000, size 0x10000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci0 dev 11 function 0 "Intel 8255x" rev 0x08, i82559: irq 11, address 00:02:b3:1d:32:81 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 ral0 at pci0 dev 13 function 0 "Ralink RT2661" rev 0x00: irq 5, address 00:30:4f:4c:0c:9b ral0: MAC/BBP RT2661B, RF RT2529 (MIMO XR) pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA pciide0: using irq 10 for native-PCI interrupt pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide1 channel 0 drive 0: <WDC WD800JB-00JJA0> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LITE-ON, COMBO SOHC-5236V, R$06> SCSI0 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 iic0 at viapm0 auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5 ac97: codec id 0x41445368 (Analog Devices AD1888) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auvia0 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 11, address 00:13:d4:56:3b:22 rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1 pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xa1) npx0 at isa0 port 0xf0/16: using exception 16 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask ff75 netmask ff75 ttymask fff7 pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted