Hi all,
I have had considerable troubles installing 4.0 on the G4 version of the
HP ML110.
In short the message axe0: read PHY failed flooded the screen and the
system became unresponsive.
In my case boot -c whether on the main console or serial console sat
unresponsive at the ukc prompt.
The culprit seems to be a BIOS setting which is enabled by default for
8042 Emulation Support and the axe drivers.
Once I disabled the 8042 emulation support I was able to boot a modified
bsd.rd with axe disabled via pxe.
The install completed smoothly. I then had to copy a modified bsd file
with axe disabled to / and all is good.
I have upgraded the BIOS on the box so I am unsure whether previous
versions had this BIOS setting to disable.
Steve
