Jean-Yves Boisiaud wrote:
hello,
We've just bought a Supermicro PDSMA motherboard and we would like to
install OBSD 4.0.
Specific hardware is a SATA II RAID controler, an Areca 1110.
North bridge : Mukilteo E7230
South bridge : ICH7R
2 GB lan controlers on the motherboard, an Intel PRO/1000MT and a 1000PT.
Here is the end of the boot sequence (the Areca seems to be ok) :
pci5 at ppb4 bus13
em0 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03 : irq
11, address ...
vendor "Intel", unknown product 0x108f (class communications subclass
serial, rev 0x03) at pci 5 dev 0 function 3 not configured
em1 at pci5 dev 0 function 4 "Intel PRO/100PT (82573E)" rev 0x03 : irq
^^^^^^
That looks weird (Intel PRO/*100*PT). Can you try with disabling those
onboard NICs?
11uvm_fault(0xd067a780, 0xe8f4F000, 0, 1) -> e
fatal page fault (6) in supervisor mode
trap type 6 code0 eip ...
panic: trap type 6, code 0, pc=d0391733
Thanks for your answer.
