OK someone smack me with a cluestick because I cannot find the answer
for this anywhere.
I've got a usb -> serial adapter and cannot figure out what port to
tell minicom to use.
Dmesg:
[ using 357380 bytes of bsd ELF symbol table ]
console out [ATY,RageM3pA]console in [keyboard] ADB found
using parent ATY,RageM3pParent:: memaddr a4000000 size 4000000, :
consaddr a4008000, : ioaddr a0020000, size 20000: memtag 8000, iotag
8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.0 (GENERIC) #1056: Sat Sep 16 21:21:14 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 134217728 (131072K)
avail mem = 112705536 (110064K)
using 1254 buffers containing 6709248 bytes (6552K) of memory
mainbus0 (root): model PowerBook3,1
cpu0 at mainbus0: 750 (Revision 0x8300): 400 MHz: 1MB backside cache
memc0 at mainbus0: uni-n
ki2c0 at memc0 offset 0xf8001000
iic0 at ki2c0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x02
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
"programmer-switch" at macgpio0 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 100% charged
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
ki2c1 at macobio0 offset 0x18000
iic1 at ki2c1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <IBM-DARA-206000>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
mediabay0 at macobio0 offset 0x34 irq 16
wdc1 at mediabay0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0 "TI PCI1211 CardBus" rev 0x00: irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
"Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41,
address 00:30:65:46:8f:60
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
ugen0 at uhub1 port 1
ugen0: Keyspan USA-19QI serial, rev 1.00/80.01, addr 2
bootpath: '/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
WARNING: clock lost 12195 days, using FS time -- CHECK AND RESET THE DATE!
