Hi all,
Thanks for the replays.
I have my test setup running and for now I am very impressed by OpenBGP
performance.
I have some additional questions.
I use route-maps in my quagga setup, but i do not see this options in
OpenBGP. How can I achieve something similar to this route-map for example:
From quagga:
neighbor x.x.x.x route-map isp-bg-in in
neighbor x.x.x.x route-map isp-bg-out out
!
route-map isp-bg-in permit 10
match as-path 55
set local-preference 500
!
!Here I have list of AS numbers like:
! ip as-path access-list 55 permit _xxx_
!I prefer to send outgoing traffic through this neighbor to AS# in the
!list.
!
route-map isp-bg-in permit 20
set local-preference 300
!
!Here if there is no match it sets local preference the same as the
!other ISP
!
route-map neterra-bg-out permit 10
match ip address 15
set as-path prepend MYAS MYAS MYAS MYAS MYAS
!
!Here I perpend my AS for some of my networks to this neighbor.
!
route-map neterra-bg-out permit 20
match ip address 25
!
!Here I do not put perpend to the rest of my networks.
I have similar route-maps on my other neighbor with opposite meaning in
order to achieve some load sharing.
Thank you very much.
Ivo
