On Thu, 29 Mar 2007, Didier Wiroth wrote: > Hello, > I'm using ROOTBACKUP=1 to have daily backups on several boxes running > amd64 OPENBSD_4_0. > Actually I noticed that on 1 box (the hardware is +/- 3 month old), the > partition is *always* corrupted after the backup. > The corruption happens every day. > > Does anyone have an idea what could be the problem?
You're copying a life filessytem. Inconsitencies are to be expected. It's the reason why fsck is run. -Otto > > I'm using a LSI Megaraid controller (see dmesg below), here is the > output. > #bioctl ami0 > Volume Status Size Device > ami0 0 Online 104857600000 sd0 RAID5 > 0 Online 400083124224 0:0.0 noencl < ST3400620NS > 3.AE> > 1 Online 400083124224 0:1.0 noencl < ST3400620NS > 3.AE> > 2 Online 400083124224 0:2.0 noencl < ST3400620NS > 3.AE> > 3 Online 400083124224 0:3.0 noencl < ST3400620NS > 3.AE> > 4 Online 400083124224 0:4.0 noencl < ST3400620NS > 3.AE> > ami0 1 Online 20971520000 sd1 RAID0 > 0 Online 400083124224 0:0.0 noencl < ST3400620NS > 3.AE> > 1 Online 400083124224 0:1.0 noencl < ST3400620NS > 3.AE> > 2 Online 400083124224 0:2.0 noencl < ST3400620NS > 3.AE> > 3 Online 400083124224 0:3.0 noencl < ST3400620NS > 3.AE> > 4 Online 400083124224 0:4.0 noencl < ST3400620NS > 3.AE> > ami0 2 Online 739246080000 sd2 RAID5 > 0 Online 400083124224 0:0.0 noencl < ST3400620NS > 3.AE> > 1 Online 400083124224 0:1.0 noencl < ST3400620NS > 3.AE> > 2 Online 400083124224 0:2.0 noencl < ST3400620NS > 3.AE> > 3 Online 400083124224 0:3.0 noencl < ST3400620NS > 3.AE> > 4 Online 400083124224 0:4.0 noencl < ST3400620NS > 3.AE> > ami0 3 Online 739451600896 sd3 RAID5 > 0 Online 400083124224 0:0.0 noencl < ST3400620NS > 3.AE> > 1 Online 400083124224 0:1.0 noencl < ST3400620NS > 3.AE> > 2 Online 400083124224 0:2.0 noencl < ST3400620NS > 3.AE> > 3 Online 400083124224 0:3.0 noencl < ST3400620NS > 3.AE> > 4 Online 400083124224 0:4.0 noencl < ST3400620NS > 3.AE> > ami0 4 Hot spare 400083124224 0:5.0 noencl < ST3400620NS > 3.AE> > > Here is the daily mail report I get: > Backing up root filesystem: > > copying /dev/rsd0a to /dev/rsd0h > 262139+1 records in > 262139+1 records out > 2147443200 bytes transferred in 548.279 secs (3916696 bytes/sec) > ** /dev/rsd0h > ** Last Mounted on / > ** Phase 1 - Check Blocks and Sizes > ** Phase 2 - Check Pathnames > ** Phase 3 - Check Connectivity > ** Phase 4 - Check Reference Counts > UNREF FILE I=103073 OWNER=root MODE=100555 > SIZE=282672 MTIME=Feb 13 08:58 2007 > CLEAR? yes > > UNREF FILE I=103086 OWNER=root MODE=100555 > SIZE=106928 MTIME=Feb 13 08:58 2007 > CLEAR? yes > > UNREF FILE I=103113 OWNER=root MODE=100500 > SIZE=255536 MTIME=Feb 13 08:58 2007 > CLEAR? yes > > ** Phase 5 - Check Cyl groups > FREE BLK COUNT(S) WRONG IN SUPERBLK > SALVAGE? yes > > SUMMARY INFORMATION BAD > SALVAGE? yes > > BLK(S) MISSING IN BIT MAPS > SALVAGE? yes > > 3116 files, 24391 used, 1007208 free (280 frags, 125866 blocks, 0.0% > fragmentation) > > MARK FILE SYSTEM CLEAN? yes > ---- end snip ------ > > Here is the dmesg: > OpenBSD 4.0-stable (GENERIC.MP) #0: Mon Jan 8 12:54:22 CET 2007 > > [EMAIL PROTECTED]:/home/sources/src/sys/arch/amd64/compile/G > ENERIC.MP > real mem = 2146562048 (2096252K) > avail mem = 1834729472 (1791728K) > using 22937 buffers containing 214863872 bytes (209828K) of memory > mainbus0 (root) > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0690 (74 entries) > bios0: stem manufacturer P5WDG2 WS PRO > mainbus0: Intel MP Specification (Version 1.4) (INTEL PRO ) > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2404.44 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: apic clock running at 267MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2404.11 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG > cpu1: 4MB 64b/line 16-way L2 cache > mpbios: bus 0 is type PCI > mpbios: bus 1 is type PCI > mpbios: bus 2 is type PCI > mpbios: bus 3 is type PCI > mpbios: bus 4 is type PCI > mpbios: bus 5 is type PCI > mpbios: bus 6 is type ISA > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0 apid 3 pa 0xfec10000, version 20, 24 pins > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c > rev 0xc0 > ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev > 0xc0 > pci1 at ppb0 bus 5 > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0163 > rev 0xa1 > mpbios: bus 3 is type PCI > mpbios: bus 4 is type PCI > mpbios: bus 5 is type PCI > mpbios: bus 6 is type ISA > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0 apid 3 pa 0xfec10000, version 20, 24 pins > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c > rev 0xc0 > ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev > 0xc0 > pci1 at ppb0 bus 5 > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0163 > rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 > pci2 at ppb1 bus 3 > ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 > pci3 at ppb2 bus 4 > ami0 at pci3 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 3 > int 0 (irq 10) > ami0: LSI 523, 32b, FW 713R, BIOS vG121, 64MB RAM > ami0: 1 channels, 0 FC loops, 4 logical drives > scsibus0 at ami0: 40 targets > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct > fixed > sd0: 100000MB, 100000 cyl, 64 head, 32 sec, 512 bytes/sec, 204800000 sec > total > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct > fixed > sd1: 20000MB, 20000 cyl, 64 head, 32 sec, 512 bytes/sec, 40960000 sec > total > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct > fixed > sd2: 705000MB, 705000 cyl, 64 head, 32 sec, 512 bytes/sec, 1443840000 > sec total > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct > fixed > sd3: 705196MB, 705196 cyl, 64 head, 32 sec, 512 bytes/sec, 1444241408 > sec total > scsibus1 at ami0: 16 targets > ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 > pci4 at ppb3 bus 2 > mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Marvell > Yukon-2 EC rev. A3 (0x2): apic 2 int 16 (irq 10) > msk0 at mskc0 port A, address 00:18:f3:46:84:3d > eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int > 20 (irq 11) > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int > 17 (irq 7) > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int > 18 (irq 3) > usb2 at uhci2: USB revision 1.0 > uhub2 at usb2 > uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int > 19 (irq 5) > usb3 at uhci3: USB revision 1.0 > uhub3 at usb3 > uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int > 20 (irq 11) > usb4 at ehci0: USB revision 2.0 > uhub4 at usb4 > uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 > pci5 at ppb4 bus 1 > "TI TSB43AB22 FireWire" rev 0x00 at pci5 dev 3 function 0 not configured > skc0 at pci5 dev 5 function 0 "Marvell Yukon 88E8001/8003/8010" rev > 0x14, Marvell Yukon Lite (0x9): apic 2 int 21 (irq 11) > sk0 at skc0 port A, address 00:18:f3:46:84:3e > eephy1 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus2 at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4571A, 1-01> SCSI0 > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 23 (irq 10) for native-PCI interrupt > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 > int 23 (irq 0) > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > > Thx a lot > Didier