Jonathan, I get the dmesg of ahci identifying my card. If you want to send me more patchs to test it's ok. I need to "set tty com0" at boot.conf and unplug my usb devices from it to boot (kbd and mouse, this machine don't have PS/2). It's strange, after the bootloader timeouts and start to load kernel, it stops at "entry point xxxxxxx" and then i need to type something to load the kernel.. w/o usb devices, it boot fine.
below is dmesg [ using 598688 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.1-current (GENERIC.MP) #3: Mon Apr 16 18:35:20 BRT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1038069760 (1013740K) avail mem = 877133824 (856576K) using 22937 buffers containing 104013824 bytes (101576K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (68 entries) bios0: Dell Inc. OptiPlex 320 acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP SSDT APIC BOOT MCFG HPET SLIC acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.48 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,C xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.11 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16, xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpiprt0 at acpi0: bus 1 (PCI1) acpiprt1 at acpi0: bus 0 (PCI2) acpiprt2 at acpi0: bus 0 (PCI3) acpiprt3 at acpi0: bus 0 (PCI4) acpiprt4 at acpi0: bus 0 (PCI5) acpiprt5 at acpi0: bus 0 (PCI6) acpiprt6 at acpi0: bus 0 (PCI8) acpiprt7 at acpi0: bus 2 (PCI7) acpiprt8 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: CPU0: acpicpu1: C2 not supported acpicpu1: C3 not supported no performance/throttling supported acpicpu1 at acpi0: CPU1: acpicpu2: C2 not supported acpicpu2: C3 not supported no performance/throttling supported acpicpu2 at acpi0: CPU2: acpicpu3: C2 not supported acpicpu3: C3 not supported no performance/throttling supported acpicpu3 at acpi0: CPU3: acpicpu4: C2 not supported acpicpu4: C3 not supported no performance/throttling supported acpibtn0 at acpi0: VBTN pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a33 rev 0x01 ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ahci0 at pci0 dev 18 function 0 "ATI IXP600 SATA" rev 0x00 GHC 0x0: AHCI 1.1: ap ic 8 int 22 (irq 11) ahci0: capabilities: 0xf722ff83<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,PMD,SSC,PS C,CCCS> ports: 4 ncmds: 32 gen: 1 (1.5Gbps) and 2 (3Gbps) ahci0: ports implemented: 0x0000000f ahci0.0: port reset ahci0: detected device on port 0 ahci0: failed to start command DMA on port 0, disabling ahci0.1: port res ahci0: no device detected on port 1 ahci0.2: port reset ahci0: no device detected on port 2 ahci0.3: port reset ahci0: no device detected on port 3 scsibus0 at ahci0: 32 targets ohci0 at pci0 dev 19 function 0 "ATI IXP600 USB" rev 0x00: apic 8 int 16 (irq 10 ), version 1.0, legacy support ohci1 at pci0 dev 19 function 1 "ATI IXP600 USB" rev 0x00: apic 8 int 17 (irq 5) , version 1.0, legacy support ohci2 at pci0 dev 19 function 2 "ATI IXP600 USB" rev 0x00: apic 8 int 18 (irq 3) , version 1.0, legacy support ohci3 at pci0 dev 19 function 3 "ATI IXP600 USB" rev 0x00: apic 8 int 17 (irq 5) , version 1.0, legacy support ohci4 at pci0 dev 19 function 4 "ATI IXP600 USB" rev 0x00: apic 8 int 18 (irq 3) , version 1.0, legacy support ehci0 at pci0 dev 19 function 5 "ATI IXP600 USB2" rev 0x00: apic 8 int 19 (irq 1 1) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: ATI EHCI root hub, rev 2.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered piixpm0 at pci0 dev 20 function 0 "ATI IXP600 SMBus" rev 0x13: SMI iic0 at piixpm0 pciide0 at pci0 dev 20 function 1 "ATI IXP600 IDE" rev 0x00: DMA, channel 0 conf igured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDRWDVD TS-H492C, DE02> SCSI0 5/cdrom r emovable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 azalia0 at pci0 dev 20 function 2 "ATI IXP600 HD Audio" rev 0x00: apic 8 int 16 (irq 10) azalia0: host: High Definition Audio re azalia0: codec: Analog Devices AD1983 (rev. 4.0), HDA version 1.0 audio0 at azalia0 pcib0 at pci0 dev 20 function 3 "ATI IXP600 LPC" rev 0x00 ppb1 at pci0 dev 20 function 4 "ATI IXP600 PCI" rev 0x00 pci2 at ppb1 bus 2 bce0 at pci2 dev 9 function 0 "Broadcom BCM4401B0" rev 0x02: apic 8 int 21 (irq 11), address 00:15:c5:35:eb:78 bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self p usb2 at ohci1: USB revision 1.0 uhub2 at usb2 uhub2: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered usb3 at ohci2: USB revision 1.0 uhub3 at usb3 uhub3: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered usb4 at ohci3: USB revision 1.0 uhub4 at usb4 uhub4: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered usb5 at ohci4: USB revision 1.0 uhub5 at usb5 uhub5: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 panic: cannot open disk, 0x0/0x300, error 6 Stopped at Debugger+0x5: leave Stopped at Debugger+0x5: leave DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb{0}> trace Debugger() at Debugger+0x5 panic() at panic+0x12a dk_mountroot() at dk_mountroot+0x1ac vfs_mountroot() at vfs_mountroot+0x5d main() at main+0x501 end trace frame: 0x0, count: -5 ddb{0}> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 12 0 0 0 3 0x2100200 pftm pfpurge 11 0 0 0 3 0x2100200 wait wskbd_hotkey 10 0 0 0 3 0x2100200 usbevt usb5 9 0 0 0 3 0x2100200 usbevt usb4 8 0 0 0 3 0x2100200 usbevt usb3 7 0 0 0 3 0x2100200 usbevt usb2 6 0 0 0 3 0x2100200 usbevt usb1 5 0 0 0 3 0x2100200 usbtsk usbtask 4 0 0 0 3 0x2100200 usbevt usb0 3 0 0 0 3 0x2100200 slacking scsi 2 0 0 0 3 0x2100200 acpi_idle acpi0 1 0 0 0 3 0x2000000 initexec swapper * 0 -1 0 0 7 0x2080200 swapper ddb{0}>