Otto Moerbeek wrote:
> On Mon, 23 Apr 2007, Han Boetes wrote:
> > Of course I crash, I crash at every reboot, I got the problem
> > where the rebooting proces gets stuck at `syncing disks' after
> > which I have to m-c-ESC and then boot sync.
> >
> > I have this on a i386 and I met someone on #openbsd who had it
> > on a sparc.
> >
> > When will this bug be fixed?
>
> After you provide a proper report?
About 50% of the shutdowns get stuck at `syncing discs...' The
only filesystem which is marked dirty is /
Here is the output of `dmesg > dmesg'. Yes dmesg remembers the
output of the previous boot on my system. And this time it didn't
happen.
Anything else you'd like to know? Would you like me to post this
one with sendbug?
ontaining 40366080 bytes (39420K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, SMBIOS
rev. 2.3 @ 0xf0630 (22 entries)
bios0: MSI MS-6380E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12
ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq
12, address 00:08:a1:3c:34:7a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00
0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 5
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: soft error (corrected)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn 159;
cn 0 tn 2 sn 33), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn 159;
cn 0 tn 2 sn 33), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0a: aborted command, interface CRC error writing fsbn 16 of 16-0 (wd0 bn 79;
cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
syncing disks... done
The operating system has halted.
Please press any key to reboot.
rebooting...
OpenBSD 4.1-current (GENERIC) #5: Sun Apr 22 01:44:59 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (785948K)
avail mem = 725520384 (708516K)
using 4278 buffers containing 40366080 bytes (39420K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, SMBIOS
rev. 2.3 @ 0xf0630 (22 entries)
bios0: MSI MS-6380E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12
ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq
12, address 00:08:a1:3c:34:7a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00
0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 5
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: soft error (corrected)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn 159;
cn 0 tn 2 sn 33), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn 159;
cn 0 tn 2 sn 33), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0a: aborted command, interface CRC error writing fsbn 16 of 16-0 (wd0 bn 79;
cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
syncing disks... Stopped at Debugger+0x4: leave
ddb> rebooting...
OpenBSD 4.1-current (GENERIC) #5: Sun Apr 22 01:44:59 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (785948K)
avail mem = 725520384 (708516K)
using 4278 buffers containing 40366080 bytes (39420K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, SMBIOS
rev. 2.3 @ 0xf0630 (22 entries)
bios0: MSI MS-6380E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12
ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq
12, address 00:08:a1:3c:34:7a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00
0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 5
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 tn
1 sn 1), retrying
wd0: soft error (corrected)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn 159;
cn 0 tn 2 sn 33), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn 159;
cn 0 tn 2 sn 33), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0a: aborted command, interface CRC error writing fsbn 16 of 16-0 (wd0 bn 79;
cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
# Han
