Hi Misc,
I have dual cpu that I've just installed OpenBSD 4.1 on - it works fine
with the generic kernel (bsd) but panics with the bsd.mp kernel.
Any ideas why bsd.mp is failing to boot on this dual intel machine?
The working dmesg and the dmesg from bsd.mp follow, including the output
from ps and trace from ddb.
Thanks
Fred
--
http://www.crowsons.net/puters/x41.php
bsd.mp dmesg followed by trace and ps from ddb:
OpenBSD 4.1 (GENERIC.MP) #1225: Sat Mar 10 19:23:18 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1133MHz ("GenuineIntel"
686-class) 1.14 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536375296 (523804K)
avail mem = 481652736 (470364K)
using 4278 buffers containing 26943488 bytes (26312K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/04/02, BIOS32 rev. 0 @ 0xfb380,
SMBIOS rev. 2.3 @ 0xf0800 (43 entries)
bios0: Supermicro P3TDDE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd04
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc60/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0xa800
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.1)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) III CPU family 1133MHz ("GenuineIntel"
686-class) 1.14 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: conflicting map entries for pin 0
ioapic0: conflicting map entries for pin 2
ioapic0: conflicting map entries for pin 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8633 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci0 dev 8 function 0 "SiS 6326 VGA" rev 0x0b: aperture at
0xfd000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 13 function 0 "Intel 8255x" rev 0x08, i82559: apic 2
int 3 (irq 10), address 00:30:48:41:53:71
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
viapm0 at pci0 dev 17 function 0 "VIA VT8233 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00DEA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-152L, C100> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1b: apic 2 int
3 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1b: apic 2 int
3 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 17 function 4 "VIA VT83C572 USB" rev 0x1b: apic 2 int
3 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x62: apic 2 int 0
(irq 11), address 00:30:48:41:57:71
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0h: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
setting tty flags
panic: timeout_add: not initialized
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
Debugger(0,0,0,e8442428,1) at Debugger+0x4
panic(d0682242,e8442428,d033a2ed,e844240c,d0203579) at panic+0x63
timeout_add(e8442428,1,e844244c,d04734af) at timeout_add+0xaa
hardclock(e8442478,a0,e844247c,d046a42d,a0) at hardclock+0x268
lapic_clockintr(e8442478) at lapic_clockintr+0x29
Xintrltimer() at Xintrltimer+0x4f
--- interrupt ---
vr_stop(d1261000,0,e8442504,d046a2d5,b0) at vr_stop+0x10e
vr_intr(d1261000) at vr_intr+0x1e3
Xintr_ioapic0() at Xintr_ioapic0+0x74
--- interrupt ---
Xdoreti() at Xdoreti+0x82
--- interrupt ---
end(e8440058,d05a0010,10,10,0) at 0xd129b000
Bad frame pointer: 0xe8443c18
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
*29812 5622 5622 0 7 0x2004002 ttyflags
5622 1 5622 0 3 0x2004082 pause sh
16 0 0 0 3 0x2100200 crypto_wa crypto
15 0 0 0 3 0x2100200 aiodoned aiodoned
14 0 0 0 3 0x2100200 syncer update
13 0 0 0 3 0x2100200 cleaner cleaner
12 0 0 0 3 0x100200 reaper reaper
11 0 0 0 3 0x2100200 pgdaemon pagedaemon
10 0 0 0 3 0x2100200 pftm pfpurge
9 0 0 0 3 0x2100200 timeout sensors
8 0 0 0 3 0x2100200 wait wskbd_hotkey
7 0 0 0 3 0x2100200 usbevt usb2
6 0 0 0 3 0x2100200 usbevt usb1
5 0 0 0 3 0x2100200 usbtsk usbtask
4 0 0 0 3 0x2100200 usbevt usb0
3 0 0 0 3 0x2100200 slacking scsi
2 0 0 0 3 0x2100200 kmalloc kmthread
1 0 1 0 3 0x2004080 wait init
0 -1 0 0 3 0x2080200 scheduler swapper
ddb{0}>
working dmesg (bsd):
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1133MHz ("GenuineIntel"
686-class) 1.14 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536375296 (523804K)
avail mem = 481710080 (470420K)
using 4278 buffers containing 26943488 bytes (26312K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/04/02, BIOS32 rev. 0 @ 0xfb380,
SMBIOS rev. 2.3 @ 0xf0800 (43 entries)
bios0: Supermicro P3TDDE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd04
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc60/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0xa800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8633 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci0 dev 8 function 0 "SiS 6326 VGA" rev 0x0b: aperture at
0xfd000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 13 function 0 "Intel 8255x" rev 0x08, i82559: irq 10,
address 00:30:48:41:53:71
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
viapm0 at pci0 dev 17 function 0 "VIA VT8233 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00DEA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-152L, C100> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1b: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1b: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 17 function 4 "VIA VT83C572 USB" rev 0x1b: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x62: irq 11, address
00:30:48:41:57:71
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f765 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
