So did anyone get the web console (which basically uses a VNC-ish java applet) working? BTW, ssh worked for me, it just took a loooong time to login.
- mdf On 5/3/07, Raimo Niskanen <[EMAIL PROTECTED]> wrote:
Beautiful! Thanks a lot! But, which FM should I R? I have searched high and low alas apparently not right. On Thu, May 03, 2007 at 03:25:20PM +0200, Reyk Floeter wrote: > hi! > > On Thu, May 03, 2007 at 12:19:01PM +0200, Raimo Niskanen wrote: > > Aah, here we go again. > > > > I still haven't figured out how to use the iLO remote console. > > > > I have tried ssh towards the iLO IP address and get no connection. > > > > I have tried telnet towards the iLO IP address and get a weird > > /./-> prompt. Can I do anything useful with it? > > > > RTFM ;) > > /./-> cd system1 > > /./system1/-> show > /./system1 > Targets > log1 > > Properties > name=Hewlett-Packard > enabledstate=enabled > > Verbs > cd > version > exit > show > reset > start > stop > help > > > /./system1/-> stop > System1 stopped. > > /./system1/-> start > System1 started. > > > > I have tried http towards the iLO IP address and get the > > server virtual power controls, etc, rather flashy, can remote > > power on, watch temperature sensors. Cool. But no console. > > > > You (or someone) just briefly mentioned Esc-Q. Where is it used? > > > > just press ESC-q anywhere at the prompt > > /./-> <ESC-q> > > and you'll get the system console. leave it with ESC-( > > > > > > > On Thu, May 03, 2007 at 01:41:32AM +0200, Reyk Floeter wrote: > > > On Wed, May 02, 2007 at 05:41:49PM +0200, Raimo Niskanen wrote: > > > > I have now spent the entre afternoon on it, but I can not get > > > > the serial console to work. > > > > > > > > boot> set tty com0 > > > > gives no prompt anywhere. I have tried many BIOS settings > > > > (but probably not all). > > > > > > > > Has anyone got it to work? > > > > > > > > > > yes, but i'm using it for the iLO remote console, not for the physical > > > serial interface. it might conflict with the iLO interface, i think > > > there are some related buttons in the BIOS IPMI/BCM section. > > > > > > # sysctl hw.product > > > hw.product=ProLiant DL145 G3 > > > # grep tty /etc/boot.conf > > > set tty com0 > > > # uname -m > > > amd64 > > > > > > reyk > > > > -- > > > > / Raimo Niskanen, Erlang/OTP, Ericsson AB -- / Raimo Niskanen, Erlang/OTP, Ericsson AB
-- Matthew Franz http://www.threatmind.net/
