Just installed a recent OpenBSD snapshot (May25) on my brand new Sony
VGN-FZ145E. Main issues seem to be in the following areas which must
all be disabled to boot
- acpi
- ehci
- pcibios
Happy to test any patches to try to fix these issues...
The very bottom of the email shows the error when each of the above is
enabled, but first a successful boot dmesg with all 3 disabled:
OpenBSD 4.1-current (GENERIC) #178: Fri May 25 03:22:20 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz ("GenuineIntel"
686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu0: unknown Core FSB_FREQ value 2 (0x42880000)
---> new processor. Needs an FSB_FREQ to be added. Happy to provide a
patch if someone could point me to the right value to use.
real mem = 2137419776 (2038MB)
avail mem = 1943977984 (1853MB)
using 4278 buffers containing 106995712 bytes (104488K) of memory
User Kernel Config
UKC> disable pcibios
305 pcibios0 disabled
UKC> disable ehci
137 ehci* disabled
138 ehci* disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 04/03/07, BIOS32 rev. 0 @
0xfdbd0, SMBIOS rev. 2.4 @ 0xdc010 (17 entries)
bios0: Sony Corporation VGN-FZ145E
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xee00! 0xdc000/0x4000! 0xe0000/0x1800!
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: EST: unknown system bus clock
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2a00 rev 0x0c
--> Mobile PM965/GM965/GL960 Memory Controller Hub
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x2a02
rev 0x0c: can't map aperture
: AGP GART
--> Mobile GM965/GL960 Integrated Graphics Controller
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Intel", unknown product 0x2a03 (class display subclass
miscellaneous, rev 0x0c) at pci0 dev 2 function 1 not configured
--> Mobile GM965/GL960 Integrated Graphics Controller
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 5
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 11
"Intel 82801H USB" rev 0x03 at pci0 dev 26 function 7 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: irq 11
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x8384/0x7662 (rev. 2.1), HDA version 1.0
azalia0: codec: 0x14f1/0x2c06 (rev. 0.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03
pci3 at ppb2 bus 6
vendor "Intel", unknown product 0x4229 (class network subclass
miscellaneous, rev 0x61) at pci3 dev 0 function 0 not configured
--> PRO/Wireless 4965 AG or AGN Network Connection
ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03
pci4 at ppb3 bus 8
mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x16,
Yukon-2 FE (0x1): irq 5
msk0 at mskc0 port A, address xx:xx:xx:xx:xx:xx
eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
ukphy0 at msk0 phy 3: Generic IEEE 802.3u media interface, rev. 0: OUI
0x121012, model 0x0004
ukphy0: no media present
ukphy1 at msk0 phy 4: Generic IEEE 802.3u media interface, rev. 0: OUI
0x020802, model 0x0002
ukphy2 at msk0 phy 5: Generic IEEE 802.3u media interface, rev. 0: OUI
0x020802, model 0x0002
ukphy3 at msk0 phy 6: Generic IEEE 802.3u media interface, rev. 0: OUI
0x024c02, model 0x0013
ukphy4 at msk0 phy 7: Generic IEEE 802.3u media interface, rev. 0: OUI
0x020802, model 0x0002
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: irq 10
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: irq 7
"Intel 82801H USB" rev 0x03 at pci0 dev 29 function 7 not configured
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 9
cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 5
vendor "TI", unknown product 0x803a (class serial bus subclass
Firewire, rev 0x00) at pci5 dev 3 function 1 not configured
--> PCIxx12 OHCI Compliant IEEE 1394 Host Controller
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2
not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 10 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2815 rev 0x03
--> 82801HEM (ICH8M) LPC Interface Controller
pciide0 at pci0 dev 31 function 1 vendor "Intel", unknown product
0x2850 rev 0x03: DMA (unsupported), channel 0 configured to
compatibility, channel 1 configured to compatibility
--> 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW AW-G540A, 1.74> SCSI0
5/cdrom removable
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: AHCI 1.1: irq 10
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK1637GS, DL02> SCSI2 0/direct fixed
sd0: 152627MB, 19457 cyl, 255 head, 63 sec, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: irq 10
iic0 at ichiic0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at uhci4: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
===============================================
error message with ACPI enabled (note, this comes from the May30th snap
===============================================
...
bios0: Sony Corporation VGN-FZ145E
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xee00! 0xdc000/0x4000! 0xe0000/0x1800!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP APIC HPET MCFG TCPA SLIC TMOR BOOT SSDT SSDT
SSDT SSDT SSDT
panic: malloc: out of space in kmem_map
The operating system has halted.
Please press any key to reboot.
========================
error message with ehci enabled
========================
...
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 5
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: irq 7
<computer freezes at this point and needs a hard reboot>
========================
error message with pcibios enabled
========================
...
bios0: Sony Corporation VGN-FZ145E
pcibios at bios0: rev 3.0 @ 0xfdbd0/0x430
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/336 (19 entries)
pcibios0: bad IRQ table checksum
uvm_fault(0xd06792c0, 0xd272f000, 0, 1) -> e
fatal page fault (6) in supervisor mode
trap type 6 code 0 eip fde3d cs 68 eflags 10046 cr2 d272fd54 cpl 0
panic: trap type 6, code=0, pc=fde3d
The operating system has halted.
Please press any key to reboot.
