Hello, I am trying to get run usb onewire on my ulstra sparc5 using openbsd 4.1.
When I insert the usb-Fob it seem to work, I get the Log message: uow0 at uhub0 port 2 uow0: Dallas Semiconductor USB-FOB/iBUTTON, rev 1.00/0.02, addr 2 onewire0 at uow0 But after that I only get the messages: uow0: read failed, len 128: TIMEOUT uow0: cmd timeout, type 0x01, cmd 0x0043, param 0x0000 Is there someone who has experince with this problem? Here my dmesg: Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.1-stable (GENERIC) #0: Sat May 19 01:54:27 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 402653184 avail memory = 356696064 using 2457 buffers containing 20127744 bytes of memory bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0 mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 1.3) @ 333 MHz, version 0 FPU cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 psycho0: bus range 0-2, PCI bus 0 psycho0: dvma map c0000000-dfffffff, iotdb 1d4e000-1dce000 pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power0 at ebus0 addr 724000-724003 ipl 37 "SUNW,pll" at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 37 wskbd0 at comkbd0: console keyboard com0 at ebus0 addr 3062f8-3062ff ipl 42: mouse: ns16550a, 16 byte fifo lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured clock1 at ebus0 addr 0-1fff: mk48t59 "flashprom" at ebus0 addr 0-fffff not configured audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 3 6: nvaddrs 0 audio0 at audioce0 hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address 08:00:20:a6:c9:ec nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0 pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to nati ve-PCI pciide0: using ivec 0x7e0 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <Maxtor 54098U8> wd0: 16-sector PIO, LBA, 39082MB, 80041248 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 wd1 at pciide0 channel 1 drive 0: <SAMSUNG SP0802N> wd1: 16-sector PIO, LBA48, 76351MB, 156368016 sectors atapiscsi0 at pciide0 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8322B, 1.02> SCSI0 5/cdrom removable wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 pci2 at ppb1 bus 2 xl0 at pci2 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x78: ivec 0x7d0xl0: reset didn't co mplete , address 00:0a:5e:1e:78:81 exphy0 at xl0 phy 24: 3Com internal media interface xl0: reset didn't complete ohci0 at pci2 dev 2 function 0 "NEC USB" rev 0x43: ivec 0x7d4, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci2 dev 2 function 1 "NEC USB" rev 0x43: ivec 0x7d5, version 1.0 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0 at pci2 dev 2 function 2 "NEC USB" rev 0x04: ivec 0x7d6 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 5 ports with 5 removable, self powered siop0 at pci2 dev 3 function 0 "Symbios Logic 53c875" rev 0x26: ivec 0x7d8, using 4K of on-boa rd RAM scsibus1 at siop0: 16 targets pcons at mainbus0 not configured No counter-timer -- using %tick at 333MHz as system clock. uow0 at uhub0 port 2 uow0: Dallas Semiconductor USB-FOB/iBUTTON, rev 1.00/0.02, addr 2 onewire0 at uow0 root on wd1a rootdev=0xc10 rrootdev=0x1a10 rawdev=0x1a12 Thanks, Dagobert Kellner