Hi all,
Last night my openbsd 4.1 has crashed and I don't know why. I am using this
openbsd as a part of two carped firewalls.
Crash dump:
kernel: page fault trap code=0
Stopped at pfsync_insert_net_state+0x451: movl 0(%eax,%edx,4),%edx
Show panic:
the kernel did not panic
Trace log:
pfsync_insert_net_state(da2ff926,1,1e0,d08d4d48) at
pfsync_insert_net_state+0x451
pfsync_input(da0e6d00,14,0,0,d2975030) at pfsync_input+0x3ef
ipv4_input(da0e6d00,d297bc80,0,d08d3000,30) at ipv4_input+0x511
ipintr(d0200058,10,d08d0010,d03c0010,d08d3000) at ipintr+0x7e
Bad frame pointer: 0xd08d4e24
Dump shows a problem with pfsync interface, and I think on two posible
problems: network interface or problem with switches.
Output of dmesg:
OpenBSD 4.1 (FWCLUSTER02) #0: Thu May 3 09:38:24 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/FWCLUSTER02
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2146795520 (2096480K)
avail mem = 1951932416 (1906184K)
using 4278 buffers containing 107462656 bytes (104944K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/02/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.3 @ 0xfb030 (83 entries)
bios0: Dell Computer Corporation PowerEdge 750
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc570/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x5600 0xce800/0x1000
0xec000/0x4000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 3,
address 00:c0:9f:3d:0e:b5
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "IBM 133 PCIX-PCIX" rev 0x02
pci3 at ppb2 bus 3
em1 at pci3 dev 4 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 11,
address 00:04:23:b8:4c:bc
em2 at pci3 dev 4 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 11,
address 00:04:23:b8:4c:bd
em3 at pci3 dev 6 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 11,
address 00:04:23:b8:4c:be
em4 at pci3 dev 6 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 11,
address 00:04:23:b8:4c:bf
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 7
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci4 at ppb3 bus 4
em5 at pci4 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 10,
address 00:c0:9f:3d:0e:b6
ahc0 at pci4 dev 3 function 0 "Adaptec AHA-3960D U160" rev 0x01: irq 11
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336607LW, DS09> SCSI3 0/direct fixed
sd0: 34732MB, 49855 cyl, 2 head, 713 sec, 512 bytes/sec, 71132959 sec total
ahc1 at pci4 dev 3 function 1 "Adaptec AHA-3960D U160" rev 0x01: irq 10
scsibus1 at ahc1: 16 targets
vga1 at pci4 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: SMBus disabled
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask efe5 netmask efed ttymask ffef
pctr: user-level cycle counter enabled
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
How can I fix this problem??
--
CL Martinez
carlopmart {at} gmail {d0t} com
