See my dmesg.txt
Multicoreprocessor support is enabled in BIOS and I boot the bsd.mp.
I have upgraded my system from 4.1 to a current snapshot of OpenBSD 4.1, but
the problem is the same.
OpenBSD 4.1 (GENERIC.MP) #1152: Sat Mar 10 19:22:57 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146758656 (2096444K)
avail mem = 1834508288 (1791512K)
using 22937 buffers containing 214884352 bytes (209848K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfb630 (30 entries)
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412.05 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB2" rev 0xa2: irq 9
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: irq 9, address
00:13:8f:cb:d4:c5
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV0411N>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd1 at pciide0 channel 0 drive 1: <IC35L060AVVA07-0>
wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8163B, 0L15> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A102> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using irq 10 for native-PCI interrupt
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT AGP" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
ne0 at pci2 dev 7 function 0 "Realtek 8029" rev 0x00: irq 11, address
00:50:bf:7a:bb:19
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
mpu0 at isa0 port 0x330/2: generic MPU-401 compatible
midi0 at mpu0: <MPU-401 MIDI UART>
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627EHF
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uaudio0 at uhub1 port 4 configuration 1 interface 0: ABC PnP Audio Device, rev
1.10/0.10, addr 2
uaudio0: audio rev 1.00, 17 mixer controls
audio0 at uaudio0
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: wd1 matches BIOS drive 0x80
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
WARNING: NVRAM century is 32 but RTC year is 2007
syncing disks...
OpenBSD 4.1-current (RAMDISK_CD) #1195: Mon Jun 25 13:28:33 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2146758656 (2047MB)
avail mem = 2075045888 (1978MB)
mainbus0 at root
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412.06 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
"NVIDIA nForce3 250 ISA" rev 0xa2 at pci0 dev 1 function 0 not configured
"NVIDIA nForce3 250 SMBus" rev 0xa1 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB2" rev 0xa2: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: irq 9, address
00:13:8f:cb:d4:c5
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV0411N>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd1 at pciide0 channel 0 drive 1: <IC35L060AVVA07-0>
wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8163B, 0L15> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A102> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using irq 10 for native-PCI interrupt
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT AGP" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
ne0 at pci2 dev 7 function 0 "Realtek 8029" rev 0x00: irq 11, address
00:50:bf:7a:bb:19
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 4096 blocks
vendor 0x0d8c PnP Audio Device, class 0/0, rev 1.10/0.10, addr 2, uhub2 port 4
not configured
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: wd1 matches BIOS drive 0x80
root on rd0a swap on rd0b dump on rd0b
WARNING: NVRAM century is 32 but RTC year is 2007
syncing disks...
OpenBSD 4.1-current (GENERIC.MP) #1322: Mon Jun 25 13:20:53 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146758656 (2047MB)
avail mem = 2073542656 (1977MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfb630 (30 entries)
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412.05 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: PowerNow! K8 2412 MHz: speeds: 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB2" rev 0xa2: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: irq 9, address
00:13:8f:cb:d4:c5
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV0411N>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd1 at pciide0 channel 0 drive 1: <IC35L060AVVA07-0>
wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8163B, 0L15> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A102> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using irq 10 for native-PCI interrupt
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT AGP" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
ne0 at pci2 dev 7 function 0 "Realtek 8029" rev 0x00: irq 11, address
00:50:bf:7a:bb:19
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
mpu0 at isa0 port 0x330/2: generic MPU-401 compatible
midi0 at mpu0: <MPU-401 MIDI UART>
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627EHF
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uaudio0 at uhub2 port 4 configuration 1 interface 0: ABC PnP Audio Device, rev
1.10/0.10, addr 2
uaudio0: audio rev 1.00, 17 mixer controls
audio0 at uaudio0
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: wd1 matches BIOS drive 0x80
root on wd1a swap on wd1b dump on wd1b
WARNING: NVRAM century is 32 but RTC year is 2007
