Hi,
I kindly ask in advance not to be stoned after I have asked the
question I am about to ask.
I am a good boy, I buy the CDs, the T-shirts, learn every day a bit
more of OpenBSD and read a couple of man pages before going to sleep
Ok? Now the question...
"How are the chances that "suspend" is implemented in ACPI for 4.2??"
(cowardly hides)
I am trapped in a laptop without APM and I miss (I am a converted
heretic linux user) the possibility of suspending a lot.
Should I go for -current and give it a try?
I _know_ that there has been a LOT of progress recently in ACPI and I
worship Marco and the others for that. Mine is a naive, innocent
question...
Thanks
Just in case of, here you are my dmesg
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel"
686-class) 1.11 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063809024 (1038876K)
avail mem = 963268608 (940692K)
using 4278 buffers containing 53313536 bytes (52064K) of memory
User Kernel Config
UKC> enable acpi
386 acpi0 enabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 09/01/04, BIOS32 rev. 0 @
0xfd720, SMBIOS rev. 2.3 @ 0xe8100 (43 entries)
bios0: FUJITSU SIEMENS 0000000000
pcibios0 at bios0: rev 2.1 @ 0xfd720/0x8e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd200! 0xdc000/0x4000!
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT BOOT
acpitimer at acpi0 not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB_)
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpiac at acpi0 not configured
acpibat at acpi0 not configured
acpibat at acpi0 not configured
acpicpu at acpi0 not configured
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1100 MHz (940 mV): speeds: 1100, 1000, 900,
800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture
at 0xd8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
cbb0 at pci1 dev 10 function 0 "Ricoh 5C476 CardBus" rev 0xab: irq 11
cbb1 at pci1 dev 10 function 1 "Ricoh 5C476 CardBus" rev 0xab: irq 11
"Ricoh 5C552 Firewire" rev 0x03 at pci1 dev 10 function 2 not configured
vendor "Ricoh", unknown product 0x0576 (class system subclass
miscellaneous, rev 0x01) at pci1 dev 10 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x00 at pci1 dev 10 function 4 not configured
rl0 at pci1 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:0b:5d:8c:e2:0d
rlphy0 at rl0 phy 0: RTL internal PHY
iwi0 at pci1 dev 13 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 11, address 00:0e:35:83:08:f2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2080AH>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq
11, ICH4 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 47997 Hz, will use 48000 Hz
iwi0: XXX too many rates (count=13, last=108)
