Hi Misc
I am probably missing something, but what.. sensorsd says in the syslog that the sensor is "within limits" even though a "sysctl -a|grep sensor" shows that it is not. Are there any known bugs? I have checked the list and cannot find anything related to this... I run a Dell PE830 on OpenBSD 4.0 stable (latest update in May 25:th). I have these sensors which appears to always show the correct values running a "sysctl -a|grep sensor". hw.sensors.0=ipmi0, Temp, 43.00 degC, OK hw.sensors.1=ipmi0, Planar Temp, 38.00 degC, OK hw.sensors.2=ipmi0, CMOS Battery, 3.13 V DC, OK hw.sensors.3=ipmi0, Back Fan, 2204 RPM, OK hw.sensors.4=ipmi0, Intrusion, Off, OK hw.sensors.5=ami0, sd0, drive online, OK >From sensords.conf hw.sensors.0:high=42C:command=/bin/echo "test test"|/usr/bin/mailx -s "Sensor warning: CPU temp over %2 bla bla bla" MYEMAIL hw.sensors.1:high=39C:command=/bin/echo "test test"|/usr/bin/mailx -s "Sensor warning: Chassie temp over %2 bla bla bla" MYEMAIL Starting sensorsd and look at /var/log/daemon Jul 3 16:12:22 xanadu sensorsd[14634]: hw.sensors.0: within limits, value: 43.00 degC Jul 3 16:12:22 xanadu sensorsd[14634]: hw.sensors.1: within limits, value: 38.00 degC I assume I receive no reports as the daemon say the sensor wrongly is within the limits.... A dmesg follows below my autosignature.... Thanks in advance Per-Olov -- GPG keyID: 4DB283CE GPG fingerprint: 45E8 3D0E DE05 B714 D549 45BC CFB4 BBE9 4DB2 83CE GPG key: http://keyserv.nic-se.se:11371/pks/lookup?op=get&search=0xCFB4BBE94DB283CE OpenBSD 4.0-stable (GENERIC) #0: Fri May 25 21:07:24 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16 real mem = 536182784 (523616K) avail mem = 481148928 (469872K) using 4256 buffers containing 26910720 bytes (26280K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 08/22/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xfa3d0 (48 entries) bios0: Dell Computer Corporation PowerEdge 830 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb900/208 (11 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00) pcibios0: PCI bus #8 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1600 0xca800/0x2600 0xec000/0x4000! ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00 ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci2 at ppb1 bus 2 em0 at pci2 dev 4 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 3, address 00:0e:0c:72:4b:a2 em1 at pci2 dev 4 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 11, address 00:0e:0c:72:4b:a3 ppb2 at pci1 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci4 at ppb3 bus 4 ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci5 at ppb4 bus 5 ami0 at pci5 dev 2 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 10 ami0: LSI 523, 32b, FW 713R, BIOS vG121, 64MB RAM ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed sd0: 476935MB, 476935 cyl, 64 head, 32 sec, 512 bytes/sec, 976762880 sec total scsibus1 at ami0: 16 targets ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci6 at ppb5 bus 6 bge0 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3, address 00:12:3f:2a:3e:b8 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 pci7 at ppb6 bus 7 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb7 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci8 at ppb7 bus 8 vga1 at pci8 dev 5 function 0 "XGI Technology Volari Z7" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4482, E108> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 11 for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 3 iic0 at ichiic0: disabled to avoid ipmi0 interactions isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ffed netmask ffed ttymask ffef pctr: user-level cycle counter enabled dkcsum: sd0 matches BIOS drive 0x80 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
