On Tue, Jul 03, 2007 at 04:18:35PM +0100, Doros Eracledes wrote:
> I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have
> various problems.
>
> I've found on previous postings that the axe and uberry driver are
> causing a problem and the kernel fails to load.
>
> What I've done until now is to install openbsd 4.1 on another machine
> update and recompile the kernel after removing the following options
> from it:
>
same thing on the DL145-G3 (the opteron version). there is something
wrong with the usb attach code, i started looking into this but i
didn't fix it yet.
you don't have to recompile the kernel, just boot into UKC and type
disable axe
...
you can also modify the kernel image without recompiling it by running
config -f -e bsd.rd
from a system running the same arch.
see the manpages boot_config(8), boot(8), and config(8)
> #uberry* at uhub? # Research In Motion Blackberry
> #axe* at uhub? # ASIX Electronics AX88172 USB
> Ethernet
>
> #pckbc0 at isa? # PC keyboard controller
> #pckbd* at pckbc? # PC keyboard
> #pms* at pckbc? # PS/2 mouse for wsmouse
> #pmsi* at pckbc? # PS/2 "Intelli"mouse for
> wsmouse
>
> After removing the ps2 keyboard and mouse controller from the kernel
> machine boots normally and keyboard and mouse is detected (seems like
> there is a USB to PS2 bridge).
> PS2 keyboard and mouse would make the machine to take very long time to
> boot (trying to initialize keyboard controller)
> i386 install shows up the same behaviour.
>
> I've tried the above using a 4.1-current install and now I need to try
> the same with 4.1-stable.
>
> Is it possible that we get patches to allow 4.1-stable install CD to be
> able to install directly on the DL140-G3 machine?
>
see above, use config(8)
reyk
>
> Here is an 4.1-current (i386) dmesg:
>
> OpenBSD 4.1-current (TELXXXX) #7: Mon Jul 2 20:21:22 EEST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/TELXXX
^^^^^^^ FOR PORN?
> cpu0: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
> ,CX16,xTPR
> real mem = 2146050048 (2095752K)
> avail mem = 1844817920 (1801580K)
> using 4278 buffers containing 214855680 bytes (209820K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd361,
> SMBIOS rev. 2.31 @ 0xdc010 (57 entries)
> bios0: HP ProLiant DL140 G3
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd360/0xca0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/512 (30 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
> 0x00)
> pcibios0: PCI bus #16 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1600
> 0xca800/0x1600 0xdc000/0x4000!
> acpi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 265 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
> ,CX16,xTPR
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
> ,CX16,xTPR
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
> ,CX16,xTPR
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 14 is type PCI
> mainbus0: bus 15 is type PCI
> mainbus0: bus 16 is type PCI
> mainbus0: bus 17 is type ISA
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x31
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci2 at ppb1 bus 2
> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> pci4 at ppb3 bus 5
> ppb4 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
> pci5 at ppb4 bus 6
> ppb5 at pci0 dev 4 function 0 "Intel 5000X PCIE" rev 0x31
> pci6 at ppb5 bus 8
> ppb6 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
> pci7 at ppb6 bus 9
> ppb7 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
> pci8 at ppb7 bus 10
> ppb8 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
> pci9 at ppb8 bus 11
> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
> ppb9 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
> pci10 at ppb9 bus 14
> bge0 at pci10 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
> (0x4101): apic 4 int 16 (irq 11), address 00:1a:4b:a4:aa:41
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb10 at pci0 dev 28 function 1 "Intel 6321ESB PCIE" rev 0x09
> pci11 at ppb10 bus 15
> bge1 at pci11 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
> (0x4101): apic 4 int 17 (irq 7), address 00:1a:4b:a4:aa:42
> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int
> 23 (irq 5)
> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int
> 23 (irq 5)
> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int
> 23 (irq 5)
> ppb11 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
> pci12 at ppb11 bus 16
> vga1 at pci12 dev 2 function 0 "Matrox MGA G200e (ServerEngines)" rev
> 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 4 int 19 (irq 255) for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <ST3160812AS>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: apic 4
> int 19 (irq 10)
> iic0 at ichiic0
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> isa0 at ichpcib0
> isadma0 at isa0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> apm0: disconnected
> uhidev0 at uhub2 port 1 configuration 1 interface 0
> uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub2 port 1 configuration 1 interface 1
> uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
> ums0 at uhidev1: 8 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
