Hi,
In the switch:
interface GigabitEthernet0/3
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,101,1280
switchport mode trunk
no ip address
interface GigabitEthernet0/6
switchport access vlan 101
no ip address
In machine A:
cat /etc/hostname.bnx0
up
cat /etc/hostname.bnx1
up
cat /etc/hostname.trunk0
trunkproto failover trunkport bnx0 trunkport bnx1
cat /etc/hostname.vlan101
vlan 101 vlandev trunk0
inet 192.168.0.1 255.255.255.240 NONE
In machine B:
cat /etc/hostname.bnx0
inet 192.168.0.7 255.255.255.240 NONE
Machine A is connected to GigabitEthernet0/3
Machine B is connected to GigabitEthernet0/6
They can't ping each other.
I don't see any traffic (not even arps) when I use
tcpdump -pni vlan101
Here comes dmesg on the HPDL360G5 machines:
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2145316864 (2095036K)
avail mem = 1950748672 (1905028K)
using 4278 buffers containing 107388928 bytes (104872K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS
rev. 2.3 @ 0xee000 (67 entries)
bios0: HP ProLiant DL360 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev 0x00)
pcibios0: PCI bus #22 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1800 0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x25d8 rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 14
ppb4 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 15
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 16
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci7 at ppb6 bus 6
ciss0 at pci7 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.08/2.08
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.08> SCSI3 0/direct fixed
sd0: 69973MB, 69973 cyl, 64 head, 32 sec, 512 bytes/sec, 143305920 sec total
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 19
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci9 at ppb8 bus 22
ppb9 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x25e6 rev 0xb1
pci10 at ppb9 bus 2
ppb10 at pci10 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci11 at ppb10 bus 3
bnx0 at pci11 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 4
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 5
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 1
vga1 at pci14 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci14 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci14 dev 4 function 2 not configured
uhci4 at pci14 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
"Hewlett-Packard IPMI" rev 0x00 at pci14 dev 4 function 6 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-N, C.6C> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub5 port 2
uhub6: HP Virtual Hub, rev 1.10/0.01, addr 3
uhub6: 7 ports with 7 removable, self powered
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
bnx1: address 00:1b:78:75:bb:ae
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1b:78:75:bb:cc
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: USB Flash Disk, rev 2.00/2.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd1 at scsibus2 targ 1 lun 0: <I-Stick2, IntelligentStick, 2.00> SCSI2 0/direct
removable
sd1: 499MB, 499 cyl, 64 head, 32 sec, 512 bytes/sec, 1023488 sec total
--
Today is Sweetmorn, the 40th day of Confusion in the YOLD 3173
+ No matter how much you do, you never do enough -- unknown
+ Whatever you do will be insignificant,
| but it is very important that you do it -- Gandhi
+ So let's do it...?
