I have two firewalls that I'm trying to sync. When one boots up the
interface shows up correctly, both are running OpenBSD 4.1 and have been
upgraded from previous versions of OpenBSD.
Server A
$ ifconfig pfsync0
pfsync0: flags=0<> mtu 1460
groups: carp pfsync
Server A after sh /etc/netstart pfsync0
$ ifconfig pfsync0
pfsync0: flags=41<UP,RUNNING> mtu 1460
pfsync: syncdev: em0 syncpeer: 64.93.69.53 maxupd: 128
groups: carp pfsync
Server B after boot
$ ifconfig pfsync0
pfsync0: flags=41<UP,RUNNING> mtu 1460
pfsync: syncdev: rl0 syncpeer: 64.93.69.36 maxupd: 128
groups: carp pfsync
Server A /etc/hostname.pfsync0
$ cat /etc/hostname.pfsync0
up syncpeer magic.ad2.com syncdev em0
Server B /etc/hostname.pfsync0
$ cat /etc/hostname.pfsync0
up syncpeer canada.ad2.com syncdev rl0
Server A dmesg
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID
,CX16,xTPR
real mem = 2146795520 (2096480K)
avail mem = 1952096256 (1906344K)
using 4278 buffers containing 107462656 bytes (104944K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 01/09/06, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf9920 (87 entries)
bios0: Dell Computer Corporation PowerEdge 1850
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb140/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
0x00)
pcibios0: PCI bus #9 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x1000
0xcd000/0x2200 0xec000/0x4000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: irq 7
ami0: Dell 16c, 32b, FW 521X, BIOS vH430, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed
sd0: 139900MB, 139900 cyl, 64 head, 32 sec, 512 bytes/sec, 286515200 sec
total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2
3/processor fixed
ppb2 at pci1 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x06
pci3 at ppb2 bus 3
san0 at pci3 dev 11 function 0 "Sangoma A10x" rev 0x00 irq 3
ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
11, address 00:13:72:57:05:8e
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
3, address 00:13:72:57:05:8f
ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ffe5 netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
uhub4: 2 ports with 2 removable, self powered, multiple transaction
translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
Server B dmesg
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.60GHz ("GenuineIntel" 686-class) 2.60
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 259551232 (253468K)
avail mem = 229146624 (223776K)
using 3199 buffers containing 13103104 bytes (12796K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/21/03, BIOS32 rev. 0 @ 0xfb9d0,
SMBIOS rev. 2.3 @ 0xf0800 (35 entries)
bios0: First International Computer, Inc. Product Name
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdeb4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfddf0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 3 5 9 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb400 0xcc000/0x8000! 0xef000/0x1000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x03: aperture
at 0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 9
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci1 at ppb0 bus 1
vendor "Acer Labs", unknown product 0x5459 (class communications
subclass modem, rev 0x00) at pci1 dev 1 function 0 not configured
rl0 at pci1 dev 3 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:40:ca:67:e5:8c
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800EB-00DJF0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, DVD-ROM SD-816B, H000> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <SAMSUNG, CD-R/RW SW-248F, R601> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 3
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: 47m192
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 3,
ICH4 AC97
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Belkin Components USB-PS2 Adapter, rev 1.10/1.20, addr 2,
iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Belkin Components USB-PS2 Adapter, rev 1.10/1.20, addr 2,
iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
