On Thu, Jul 19, 2007 at 10:47:55AM -0400, Charlie Farinella wrote: > Our company has purchased 3 of these servers, and I would like very much > to get the onboard nic working on at least one of them. > > I have installed OpenBSD 4.1 and it seems to recognize the interface > correctly and use the correct driver ( bge ) for it, but it is not > responsive. It will not connect to our network at all. Googling tells > me some others have had the same problem, but I haven't found any > solutions so far.
If you apply revision 1.212 of src/sys/dev/pci/if_bge.c then your nic will start working. dlg > > ifconfig output looks normal, dmesg provides: > == > bge0 at pci4 dev 0 function 0 "Broadcom BCM5754" rev 0x02, BCM5787 A2 > (0xb002): > irq 10, address 00:1a:a0:24:03:ef > brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev.0 > == > Pointers, etc. would be a big help. > > Thanks, > > --charlie > > -- > ------------------------------------------------------------------------ > Charles Farinella > Appropriate Solutions, Inc. (www.AppropriateSolutions.com) > [EMAIL PROTECTED] > voice: 603.924.6079 fax: 603.924.8668
