On 7/31/07, Uwe Stuehler <[EMAIL PROTECTED]> wrote:
> By "such", I presume you mean the format, not that the card is special?
Yes, that's right.
> In that case you could do "mount -t msdos /dev/sd1c /mnt" (or without -t).
I tried to, but got I/O error.
On 7/31/07, Uwe Stuehler <[EMAIL PROTECTED]> wrote:
> Maybe the card is funky. Can you show me the full dmesg?
OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1071833088 (1046712K)
avail mem = 906268672 (885028K)
using 22937 buffers containing 107393024 bytes (104876K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe7010 (14 entries)
bios0: MaxSelect Mission_X710S
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Turion(tm) 64 Mobile Technology MT-28, 1592.07 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-w
ay L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: PowerNow! K8 1592 MHz: speeds: 1600 800 MHz
cpu0: AMD erratum 89 present, BIOS upgrade may be required
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RX480 Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "ATI RX480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility X700 M26" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 6 function 0 "ATI RX480 PCIE" rev 0x00
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x19,
Yukon-2 EC rev. A3
(0x2): irq 10
msk0 at mskc0 port A, address 00:03:25:1b:42:ea
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 11,
version 1.0, leg
acy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: irq 11,
version 1.0, leg
acy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x11: SMI
iic0 at piixpm0
pciide0 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA,
channel 0 configu
red to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1200VE-00KWT0>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-7551A, 1-02> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
pci3 at ppb2 bus 3
cbb0 at pci3 dev 7 function 0 "TI PCI7XX1 CardBus" rev 0x00: irq 11
"TI PCI7XX1 FireWire" rev 0x00 at pci3 dev 7 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci3 dev 7 function 3 not configured
sdhc0 at pci3 dev 7 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
iwi0 at pci3 dev 9 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 7, address
00:12:f0:0e:3a:8e
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5 "ATI IXP400 AC97" rev 0x02: irq 7
auixp0: soft resetting aclink
"ATI IXP400 Modem" rev 0x02 at pci0 dev 20 function 6 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Raptor Gaming PS/2+USB Mouse, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auixp0
iwi0: XXX too many rates (count=13, last=108)
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Genesys Logic USB TO IDE, rev 2.00/0.33, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <TOSHIBA, MK1234GAX, 0811> SCSI0 0/direct fixed
sd0: 114473MB, 114473 cyl, 64 head, 32 sec, 512 bytes/sec, 234441648 sec total
scsibus2 at sdmmc2: 2 targets
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 490MB, 490 cyl, 64 head, 32 sec, 512 bytes/sec, 1003520 sec total
sd1 detached
scsibus2 detached
--
.0.
..0
000
